I replaced my front mount pad with little issue. The rear is a real PITA. How do you get to the lower bolt? I looked on Vadis and still can't get to that bolt. It looks like I may need to remove the sway bar. But there is little to no clearance on one of those bolts. Any suggestions?
2001 S80 2.9 L

I was reading how to remove a S80 transmission when I saw a picture of one of the steps. It was how to remove this rear engine pad. You need a 14mm 1/4 socket and a 6" extension. My sets don't have a 14mm so I had to buy one. See if your sets have this before starting. Still a challenge but the only way to do it. Once the bolt is out and you raise the engine and the pad is now loose, the next challenge is to get it out! A few twists, rotations, bending exhaust pipes and hoses and then it comes out on the right side of the engine bay. Same pattern to get the new one back in. Be sure to remove the bolts from the front pad, and your transmission mount as well before lifting your engine.