Volvo AWD 850 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 8/2015 850 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

fuel line fitting at sending unit 850

Smelled gas today and discovered that supply fuel line fitting at exterior of sending unit is leaking when under pressure. Anyone know if these odd pinch fittings are a replacement part? There isn't any slack in the rubber line to allow cutting off the old fitting, so I assume that Volvo sells it with a short hose attached?








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    fuel line fitting at sending unit 850

    I think you're referring to the 'quick connect' couplers that attach to the steel line 'nipple' on the pump assembly?

    I bought a couple of these at Canadian Tire - they were made by Papco and they cost ~$12 each I think.

    The fuel system in my V70 is all vinyl line and it was a bit of a change from what I was used to (steel line and rubber fuel injection hose) but if you find somewhere that sells all the proper fittings for vinyl line you'll have no problem making the repairs you need. But it does take 'special' stuff.


    --
    1998 V70 AWD->FWD Turbo 200k+







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.