Volvo AWD S70 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2008 S70 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

S70 T CODE P0014 S70 1999

posted by  BELVEDERE MOTORS on  Tue Mar 16 16:32 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Jan 31 22:39 CST 2013
[RELATED]

Hi Gurus, i have a 99/00 S70 2.4T and i have just replaced the B5244T with another B2544T as the guy i bought it off cooked the engine. i installed a new cam belt as part of the fitout. now i am getting a p0014 code, which i gather has to do with the exhaust cam timing. the car runs fine, though is a bit lumpy for a second or 2 after cold start. does this have to do with the VVT? thanks








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    S70 T CODE P0014 S70 1999

    posted by  KlausC on  Tue Mar 16 17:06 CST 2010
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Fri Oct 24 10:15 CST 2014
    [RELATED]

    Yes. The exhaust cam is off by a tooth and needs to be repositioned.

    Line up all three timing marks and you will see the exhaust cam off the mark. Then turn the engine clockwise another 90 degrees, and then back to the timing marks. This releases the tension on the VVT.

    Pull back the tensioner and release the belt and reposition the cam.

    Klaus
    --
    Praying for Cynthia Amendt, heaven bound







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.