Volvo AWD 850 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2009 850 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

850 Blower removal steps 850 1996

posted by  ketchgould on  Fri Oct 2 13:26 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Jun 11 13:03 CST 2013
[RELATED]

Greetings:

My blower has been squeaky for two years...how do I remove the bad one. What panels to remove, etc?

Thanks
Christian








  REPLY TO THIS MESSAGE    PRINT   SAVE 

850 Blower removal steps 850 1996

posted by  someone claiming to be fixit2002 on  Sat Oct 3 01:48 CST 2009 [RELATED]

Remove the passenger side knee bolster and the glove box. You can easily take the motor apart and lubricate the bushings. The brushes have probably also worn down and run out of slack for the wires. If you're handy with a soldering iron you can uncrimp the wires and slip them a bit to get a few more years service out of the motor.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

850 Blower removal steps 850 1996

posted by  LilHelpHere on  Fri Oct 2 15:27 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 15 22:09 CST 2014
[RELATED]

There's a video for it on youtube
doesn't look too hard
have fun
--
'97 855na, Mobil 1, K&N, various IPD's and eBay's







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.