Volvo AWD S70 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 11/2001 S70 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

ipd anti-sway bar S70 1998

posted by  someone claiming to be mike on  Mon Nov 19 10:05 CST 2001 [RELATED]

Any reason IPD does not offer anti-sway bars for the S70. Maybe

their web pages is out of date and I need to call them?

If you know of any other vendors could you let me know.

thanks,

S70 GLT







  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    Re: ipd anti-sway bar S70 1998

    posted by  someone claiming to be Gavin Lim on  Mon Nov 19 13:41 CST 2001 [RELATED]

    Last I gathered from IPD is they're revising the design of the sway bars for the 850/70 series, due Jan 2002.







  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    They do, but back ordered... S70 1998

    posted by  someone claiming to be Punxsutawney Phil on  Mon Nov 19 10:20 CST 2001 [RELATED]

    as I understand it they're not available until Dec. or Jan., there was some problem or other with a batch of them, call IPD for details.

    FWIW, mine have been on for about 75,000 miles now. Squeaky bushings, but that's been the only problem.

    Ol' Man Groundhog







    •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

      Re: They do, but back ordered... S70 1998

      posted by  someone claiming to be mike on  Mon Nov 26 04:42 CST 2001 [RELATED]

      Are these DIY-able? I heard they require lifting the engine a bit for the front bar?







      •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

        Re: They do, but back ordered... S70 1998

        posted by  someone claiming to be Chris J on  Tue Nov 27 05:42 CST 2001 [RELATED]

        It is an easy install. I did mine in about 30-45 min. It helps if you have a good torque wrench and floor jack. You don't have to lift the engine but will have to lift the front of the car to take the stress of the strut towers(floor jack need).






<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.