Volvo AWD S40-V40 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2011 S40-V40 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

'00 S40 DTCs S40-V40

posted by  MKM661 on  Mon Jul 20 15:25 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Mar 26 22:52 CST 2007
[RELATED]

I have a 2000 S40 with 210,000+ miles on it. Lately I have been setting 2 DTCs, P0705 & P1618. When the codes set the engine goes into a limp home condition. I clear the codes with my tool and I am fine until the next time.

I believe that the 0705 is 'Trans Range Switch Circuit malfunction (PRNDL input)and I have not been able to find a definition for the P1618.

I was wondering if anyone out there knows exactly what these codes mean?

Many thanks...








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    '00 S40 DTCs S40-V40

    posted by  KlausC on  Tue Jul 21 04:49 CST 2009
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Fri Oct 24 10:15 CST 2014
    [RELATED]

    For the 850/70 engines, that is usually the PNP switch. The next time you get the error, put the tranny in R and if there are no backup lights you will need a new PNP switch. Rowing the shifter between R and L about 20 times might help.

    Klaus
    --
    The more I learn, the more I forget. So why learn?







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.