As Rule308 stated, you need an OEM switch. My dealer once told be that the software has to be upgraded if the switch is replaced. I don't know if I believe that or not... but it is worth a check.

The switch for the pass window may just be a little dirty. Try moving the switch a hundred times, just up. That may clean the contacts and get it moving again. Cheaper than buying a new one. Besides, the passenger door switch still works.

Klaus

--
The 164 has a new home, all I am left with are a 95 854T and a 98 V70R :)

Those switches can be just a bit of a pain in the butt. They are a simple pop in/pop out deal but the fit is so darn tight and close it is really a pain to get a pocket screwdriver in there to get it out. Once out it is an even bigger pain to get it to go back in. But, like I said, they are just a pop in and pop out deal, you need not pull anything else. The arm rest is an integral part of the door panel and pulling that screw under the little cover panel is not going to facilitate anything.

Also, do waste your time and money on any knock off e-bay switch panels, stuff a factory one in it and be done with it. Afterall, your factory one is currently dying, you don't really think that the Taiwanese knock off part is going to work better do you?

Mark