Volvo AWD 850 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2007 850 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

ABS Fault Code Reading Problems 850 1995

I had my ABS Activate with any brake application. For the time being, I removed the fuse until I could clean the wheel sensors. Today, I cleaned the sensors which 2 were quite dirty and caked with brake residue. Re-installed the fuse and the ABS no longer activates but the ABS light is still on the dash. I tried to pull the codes off the A-Module by plugging the plug into A-3 and pushing the button for one second after turning on the ignition to position two. No codes would come up no matter how many times I tried. The LED lights bright when I push the button, but no codes come up.. Any help or guidance would be greatly appreciated.

Thanks...








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    ABS Fault Code Reading Problems 850 1995

    Just renewing the plea for assistance on this issue. I haven't resolved the problem yet. Still unable to get the codes off of the A Block Module. Any help would be greatly appreciated...

    Thanks!!!







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.