Volvo AWD S60 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2015 S60 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Oil change S60 2007

Any one know the wrench size for removing the oil filter cup, (Cup wrench)?








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Oil change S60 2007

Hi Jeff

Check out the oil filter wrench at

http://www.ipdusa.com/ProductsCat.aspx?CategoryID=142&NodeID=5052&RootID=629

Ketchb








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Oil change S60 2007

It's 86mm with 16 flutes.

There's the heavy "will survive a nuclear blast" model made by Assenmacher that can be found for around $20. IPD also sells a cheaper model made by CTA Tools for around $6. It's CTA part A261. It can be found at http://www.autopart.com/TOOLS/TOOLSMAIN/tool/T_A261.htm for about $2 before s&h.

I think that PEP boys also carries the CTA one for around $4.

Although I love the look and feel of the Assenmacher wrench it's tough to justify the price for a non-critical tool that's used so infrequently, so I bought the CTA. It works just fine.

There are also a couple of cheap ones on EBay, but I read that the 3/8" "socket" can break off.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Oil change S60 2007

Maybe i'm not putting mine on tight enough, but if you have a pair of either latex or nitril gloves you should be able to grip it tight enought to do it by hand. not sure of the size


Zach
97 850 165k







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.