Volvo AWD 850 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2018 850 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

How best to pry driver's side axle from tranny? 850 1994

posted by  rsmigel on  Sat Feb 3 10:27 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Aug 11 21:30 CST 2011
[RELATED]

While I'm waiting some advice on how to separate the axle from the hub, I was wondering what the best technique was for pulling the axle from the tranny. There appears to be no room on the front size of the axle, so there is only access on the top, rear and bottom.

One post described a 3mm gap between the boot and tranny case. It seems like I've barely got that, if any.

Many posts say not to bind the axle. So I'll need two screwdrivers, positioned 180 degrees apart, right? What other "special" tools have been used?

Is there a factory made tool made to pop this thing out? If not too expensive, I'll buy it, wait a year to validate my fix, then Ebay it.

Thanks in advance!

- Rick






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New How best to pry driver's side axle from tranny? [850][1994]
posted by  rsmigel  on Sat Feb 3 10:27 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.