Volvo AWD S70 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2002 S70 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Exhaust manifold removal S70 1998

posted by  someone claiming to be John in SW Ontario on  Tue Oct 24 06:00 CST 2006 [RELATED]

Can anyone give me a link to a description of how to remove the exhaust manifold? The Chilton's manual I have has nuttin'. Thanx.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Exhaust manifold removal S70 1998

posted by  volvorecycle on  Tue Oct 24 14:21 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Apr 7 09:43 CST 2014
[RELATED]

its easy.
Remove the 5 bolts holding the manifold sheild on ( silver in colour)
remove all the nuts securing the manifold to the head ( 13 mm)
Then from underneith remove the 4 nuts securing the manifold to the catylitic converter flange.
Then you should be able to work the manifold out of there from the top.
If you have problems, you can remove the plate holding the catalytic converter up, its 4 bolts.
also replace both the manifold to head gasket and flange gasket








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Exhaust manifold removal S70 1998

posted by  volvorecycle on  Tue Oct 24 14:21 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Apr 7 09:43 CST 2014
[RELATED]

its easy.
Remove the 5 bolts holding the manifold sheild on ( silver in colour)
remove all the nuts securing the manifold to the head ( 13 mm)
Then from underneith remove the 4 nuts securing the manifold to the catylitic converter flange.
Then you should be able to work the manifold out of there from the top.
If you have problems, you can remove the plate holding the catalytic converter up, its 4 bolts.
also replace both the manifold to head gasket and flange gasket








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Exhaust manifold removal S70 1998

posted by  volvorecycle on  Tue Oct 24 14:20 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Apr 7 09:43 CST 2014
[RELATED]

its easy.
Remove the 5 bolts holding the manifold sheild on ( silver in colour)
remove all the nuts securing the manifold to the head ( 13 mm)
Then from underneith remove the 4 nuts securing the manifold to the catylitic converter flange.
Then you should be able to work the manifold out of there from the top.
If you have problems, you can remove the plate holding the catalytic converter up, its 4 bolts.
also replace both the manifold to head gasket and flange gasket








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Exhaust manifold removal S70 1998

posted by  volvorecycle on  Tue Oct 24 14:20 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Apr 7 09:43 CST 2014
[RELATED]

its easy.
Remove the 5 bolts holding the manifold sheild on ( silver in colour)
remove all the nuts securing the manifold to the head ( 13 mm)
Then from underneith remove the 4 nuts securing the manifold to the catylitic converter flange.
Then you should be able to work the manifold out of there from the top.
If you have problems, you can remove the plate holding the catalytic converter up, its 4 bolts.
also replace both the manifold to head gasket and flange gasket







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.