Volvo AWD S80 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2007 S80 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Replacing the window control console. S80

posted by  someone claiming to be 850thenS80 on  Fri May 19 06:56 CST 2006 [RELATED]

Does anyone know hoe to replacing the window control console? I have dropped some coffee into this area and I need to pull it out and clean it. I popped of the plastic pice that allows access to the screw that holds it in. The screw is star shaped and I have the appropriate type of bit and have removed the screw. But when I go to pull it out it looks like I'm going to break or damage the plastic housing of the console because it seems to be snapped into place. ANy idea on how to remove this?








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Replacing the window control console. S80

    posted by  Thomass on  Wed May 24 07:32 CST 2006
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Fri Jul 13 01:50 CST 2007
    [RELATED]

    The torx screw is only half the trick.
    You need to remove the door panel go gain access to
    a nut below the control module that holds it to the
    door panel itself.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.