Volvo AWD 850 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2004 850 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Serp belt install 850 1995

posted by  Mr. Detail on  Tue Sep 27 02:54 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Sep 8 11:44 CST 2014
[RELATED]

I recently bought the longer serpentine belt but I am not sure about the correct
installation procedure. Can anyone send me the sketch that shows how to wrap the belt around the proper pulleys? I know it is a litle different thatn the standard belt length.








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Serp belt install 850 1995

    posted by  MartyF on  Tue Sep 27 09:58 CST 2005
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

    Go to this site...

    http://www.volvospeed.com/maintence.htm

    Under the "engine" section there are two serpentine belt installation instruction sets... click on the one that says "serpentine belt installation 850's"... that will open a .pdf document which shows both the old and new layouts.

    Notice that there is one pulley which doesn't have an outer lip... that's the one which goes into place last, after routing the belt over all the other pulleys. With no outer lip, it's easy to form a sort of "loop" in the belt, and then just slide it into place.

    Good luck

    Marty
    '96 855T







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.