Error: you cannot edit this post. It has been too long since it was posted.

Volvo AWD V50 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2010 V50 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

ABS module Removal 2006 Volvo V50 non-turbo V50 2006

posted by  KlausC on  Sun Jun 16 10:26 CST 2019
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:15 CST 2014
[RELATED]

You never gave a reason for the brake module removal. What is the error message?

If your car has DTSC, there will be a button for it on the dash (on or off).

Nothing should be attached to the firewall. The wiring harness for the brake pressure controller has a cover that gets pried up, not off, and has 3 fragile plastic clips.

Xemodex.com may be able to help with the electronics. If the error is due to the pressure switch, you might want to find a replacement at a salvage yard to play with.

I found a video on youtube with a solution for a pressure switch:

https://www.youtube.com/watch?v=rtuSNSeUvGY

For removal:

https://www.youtube.com/watch?v=Scn67edNUQQ
--
Keeping it running is better than buying new






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New ABS module Removal 2006 Volvo V50 non-turbo [V50][2006]
posted by  mbarron  on Sun Jun 16 07:42 CST 2019 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.