Error: you cannot edit this post. It has been too long since it was posted.

Volvo AWD V50 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2018 V50 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Is it necessary to remove bottom half of the side Timing Belt cover in order to replace the TB? V50 2006

posted by  KlausC on  Fri May 6 11:32 CST 2016
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:15 CST 2014
[RELATED]

What bottom cover? There is only the small plastic dirt guard under the crank pulley that comes off with two 10mm bolts.

Once the top cover is removed (covering the belt), all of the belt should be visible and accessible. Removing the crank pulley should not be needed.

--
Keeping it running is better than buying new






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Is it necessary to remove bottom half of the side Timing Belt cover in order to replace the TB? [V50][2006]
posted by  mbarron  on Thu May 5 17:34 CST 2016 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.