BrickBoard ArchivesThe files contained in this listing have been automatically archived from the active forums. Because the vast majority of posts are now in one place, this archive is considered legacy. You should use the SEARCH feature OR choose your topic and select date tabs within the forum you choose.
Re: calibrating headlight wipers[850/95] posted by Brandt Schram on
Wednesday, 13 May 1998, at 6:33 p.m.
My '95 850 had the same problem. The HL wiper arm is on a spline, lift the cover on the nut where the arm connects to the shaft, carefully loosen it, pull the arm off the spline, rotate to the desired position then re-intsall. Be sure to hold the wiper arm while removing and re-installing the nut so as not to damage the assembly. Also, be sure you test the wiper for possible interference with the stop.
This seems to be a common feature, about 20% of the 850s I've seen have this on the right wiper.. Any comments?
Hope this helps-Brandt
Yellow '95 854 T-5R
Group 6 Exhaust and BBTB