Quantcast
RWD - 1993 940T Replace Exhaust Manifold Gaskets...Remove Turbo?

Volvo RWD 900 Forum

INDEX FOR 10/2019(CURRENT) INDEX FOR 4/2003 900 INDEX [<<]  [>>]

 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE   A    A 

1993 940T Replace Exhaust Manifold Gaskets...Remove Turbo? 900

I have been postponing this job because of the potential for broken studs and the usual unforeseen. But I am ready to order parts and after reading the FAQ I would like to ask those familiar with the job if it would be helpful to remove the turbocharger.

The FAQ says to "loosen the turbo to down pipe nuts OR loosen the down pipe fixing bolts at the bell housing and transmission, depending on your car". Is this going to give me enough room to get the manifold out of the way and to replace the studs?

I would also like to know of any parts that might be needed besides the gaskets, nuts and new studs. That will certainly depend on whether I remove the turbo.

Thanks.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1993 940T Replace Exhaust Manifold Gaskets...Remove Turbo? [900]
posted by  AVL940T  on Fri Sep 20 13:29 CST 2019 >

Cut and paste link:

<< < > >>


Users marked in green are currently online.

©Jarrod Stenberg 1997-2016. All material except where indicated.


Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.

All participants agree to these terms.
Powered by Denizen - Custom Software for Enthusiasts