Quantcast
RWD - brake light on

Volvo RWD 900 Forum

INDEX FOR 9/2019(CURRENT) INDEX FOR 10/2013 900 INDEX [<<]  [>>]

 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE   A    A 

brake light on 900

My 940 brake lights are on permanently. Everything was fine until i took out the booster to re crimp it as it was leaking at the join.
Put back together now rear light stuck on.
The brake switch is at full length adjustment, the pedal doesn't come back enough to touch the switch its like the whole pedal box needs to go forward, maybe i need to take of the internal insulation on the inside as this could be preventing the booster pulling back, can you adjust the pedal shaft from the booster to make it longer or maybe the switch is stuffed. If i put my finger on the switch and push the end back in the lights will turn off. Looks like a need a longer switch or the pedal needs somehow come back more.any ideas






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New ANSWERED brake light on [900]
posted by  volvo426  on Sun Jun 23 01:14 CST 2019 >

Cut and paste link:

<< < > >>


Users marked in green are currently online.

©Jarrod Stenberg 1997-2016. All material except where indicated.


Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.

All participants agree to these terms.
Powered by Denizen - Custom Software for Enthusiasts