Quantcast
RWD - Looking for wiring connectors for 1800ES turn signals

Volvo RWD 1800 Forum

INDEX FOR 7/2019(CURRENT) INDEX FOR 7/2005 1800 INDEX [<<]  [>>]

 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE   A    A 

Looking for wiring connectors for 1800ES turn signals 1800

Hi Ron!

I wish I had more pictures of the problem before I fixed it, but since replacing the connectors I haven't had any trouble.

I didn't end up using the new plastic connectors, since I put it together in a slightly non-stock (and reversible!) mod. I found a set of side marker lights at the junkyard and modified them for two-filament bulbs, so now my side running lights also act as turn signals. Not a flashy mod, but I'm using it as a daily driver and can always put the original markers back on. So far, no problems, but that could be because I've been slowly going through all my car's wiring, cleaning it up, and I think it was just a long time since everything got a good check-up and cleaning. Seems like a lot of spade connectors had become worn and were hanging on by a thread.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Looking for wiring connectors for 1800ES turn signals [1800]
posted by  fran krause  on Fri Feb 22 12:39 CST 2019 >

Cut and paste link:

<< < > >>


Users marked in green are currently online.

©Jarrod Stenberg 1997-2016. All material except where indicated.


Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.

All participants agree to these terms.
Powered by Denizen - Custom Software for Enthusiasts