Quantcast
RWD - speedometer inop

Volvo RWD 900 Forum

INDEX FOR 8/2019(CURRENT) INDEX FOR 7/2003 900 INDEX [<<]  [>>]

 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE   A    A 

speedometer inop 900 1993

Thanks Randy. I found that the connector, even after 25 years, was still in acceptable condition. The wiring from the sensor up to the connector in the
"black Box" was in good shape (it rang out ok). Even the connector disconnected
from the sensor easily, just a light tug. I measured the sensor itself at 1.35k
ohms. Cannot find what it should read, if anything. I made an attempt to pull
the sensor away from the differential and although it would swivel, it just refused to be yanked off of its mounting. Appreciate your input.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New speedometer inop [900][1993]
posted by  Dom's940  on Sat Apr 13 16:28 CST 2019 >

Cut and paste link:

<< < > >>


Users marked in green are currently online.

©Jarrod Stenberg 1997-2016. All material except where indicated.


Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.

All participants agree to these terms.
Powered by Denizen - Custom Software for Enthusiasts