Quantcast
RWD - Steering u-joint removal help. So I can remove and replace steering rack

Volvo RWD 200 Forum

INDEX FOR 4/2018(CURRENT) INDEX FOR 3/2011 200 INDEX [<<]  [>>]

 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE   A    A 

Steering u-joint removal help. So I can remove and replace steering rack 200 1993

I’m new to the forum. I have a 93 Classic Wagon. Currently struts and control arms are off car as I am replacing bushings, springs, ball joints, tie rod ends, and strut inserts. Noticed a pretty bad leak on my passenger side steering rack. Going to have it rebuilt. But I have tried everything to get the steering u-joint loose. Tried the lower side (rack side) and the upper side. I can’t get it to budge. The joint is good and want to be able to reuse it.

Been trying to get the u-joint loose for 2 days now.

I have also searched the forums deeply. “Basically bang on it until it comes off”. I’ve been doing that for two days and it is not working

Any help would be greatly appreciated

-Joe

 





[about brickboard ads]

THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Steering u-joint removal help. So I can remove and replace steering rack [200][1993]
posted by  Joetrackside  on Sun Apr 8 12:08 CST 2018 >

[about brickboard ads]

Cut and paste link:

<< < > >>


Users marked in green are currently online.

©Jarrod Stenberg 1997-2016. All material except where indicated.


Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.

All participants agree to these terms.
Powered by Denizen - Custom Software for Enthusiasts