Quantcast
RWD - Crankshaft Pulley (Harmonic Balancer - B230 Engine) - Proparts

Volvo RWD 900 Forum

INDEX FOR 12/2017(CURRENT) INDEX FOR 5/2011 900 INDEX [<<]  [>>]

 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE   A    A 

Crankshaft Pulley (Harmonic Balancer - B230 Engine) - Proparts 900

Dear Fellow Brickboarders,

Hope you're well. I report that the Proparts Sweden Crankshaft Pulley / Harmonic Balancer (Volvo #9135194 / ProParts #21435194) - made in Korea - accepts the Volvo/IPD counter-hold tool. For no obvious reason, some "aftermarket" crank pulleys have slots too narrow to accept the counter-hold tool. The slots in the ProParts pulley are about 7mm in width (i.e., the narrow side of the slot)

The surface finish on the ProParts pulley is very smooth. Plainly, I do not know how this part will last: that depends critically on the durability of the rubber, between the steel core and the outer section, on which ride the drive belts.

Koreans' dedication to top-notch quality suggests this pulley will give many years service.

Hope this helps.

Yours faithfully,

Spook

 





[about brickboard ads]

THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Crankshaft Pulley (Harmonic Balancer - B230 Engine) - Proparts [900]
posted by  spook  on Mon Oct 9 17:31 CST 2017 >

[about brickboard ads]

Cut and paste link:

<< < > >>


Users marked in green are currently online.

©Jarrod Stenberg 1997-2016. All material except where indicated.


Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.

All participants agree to these terms.
Powered by Denizen - Custom Software for Enthusiasts