Quantcast
RWD - steering rack

Volvo RWD 200 Forum

INDEX FOR 12/2017(CURRENT) INDEX FOR 6/2006 200 INDEX [<<]  [>>]

 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE   A    A 

steering rack 200

Curious if anyone can tell if the steel line that I bent to make room for the u-bolt is a return line and if so, will the line endure minimal pressure?

I ask because after bending the line out of the u-bolt's way I have torqued the line down in place and I had trouble getting everything to go back to how it looked originally. I know the fittings aren't seated properly but I've used thread sealer and liquid gasket on the end with the exposed threads, which I cannot torque down anymore though there are more than five threads on the inside that I did torque down.

Having trouble with the image url. I put in the box: C:\Users\bkhouri\Desktop\volvo\steering rack\IMG_2161

but that did not work... any help would be appreciated!

Thank you


 





[about brickboard ads]

THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New steering rack [200]
posted by  khouri  on Fri Sep 29 05:15 CST 2017 >

[about brickboard ads]

Cut and paste link:

<< < > >>


Users marked in green are currently online.

©Jarrod Stenberg 1997-2016. All material except where indicated.


Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.

All participants agree to these terms.
Powered by Denizen - Custom Software for Enthusiasts