Quantcast
RWD - AMM & Sealant/Hole?

Volvo RWD 700 Forum

INDEX 700 INDEX [<<]  [>>]

 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE   A    A 

AMM & Sealant/Hole? 700 1989

On the AMM (007) and I noticed also on 020 (different car) there appears to be an area where sealant? is placed (by manufacturer) into what appears to be a small hole -- about 5mm in diameter or so. This is specifically located on the face of the black plastic piece(above the 007 stamp) which has the electrical connector on the front of it. It appears that on the 007 AMM the sealant has aged and may have some pin holes in it.

Anyone familiar with what the purpose is of this sealant? Is there a hole, screw, or something beneath?

Thanks!

--
dnvolvo '89 765T - '91 245






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New AMM & Sealant/Hole? [700][1989]
posted by  dnvolvo  on Fri Mar 25 14:57 CST 2005 >

Cut and paste link:

<< < > >>


Users marked in green are currently online.

©Jarrod Stenberg 1997-2016. All material except where indicated.


Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.

All participants agree to these terms.
Powered by Denizen - Custom Software for Enthusiasts