Quantcast
RWD - Installed center armrest today

Volvo RWD 200 Forum

INDEX FOR 8/2019(CURRENT) INDEX FOR 12/2010 200 INDEX [<<]  [>>]

 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE   A    A 

Installed center armrest today 200

I installed a center arm rest in my 1991 240 today, and I wanted to mention / clarify a few things. I read one how to that said the seats need to be removed. I did not find that to be the case, just push them forward as far as they will go. A 16mm socket is needed not a 17 as was mentioned somewhere. Also I read that the center console needs to be removed??? not the case with my 1991.
Anyway it was a pretty easy installation, the big bolt goes in at a weird angle that threw me for a bit, try it without the bar in place.
The beige leather cover I bought off of eBay is not even close to the same color, nit a big deal for me but might to some.
The points I made above are for a 91 maybe other years are different and that could be the difference.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Installed center armrest today [200]
posted by  dnordin  on Sun Mar 3 18:24 CST 2019 >

Cut and paste link:

<< < > >>


Users marked in green are currently online.

©Jarrod Stenberg 1997-2016. All material except where indicated.


Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.

All participants agree to these terms.
Powered by Denizen - Custom Software for Enthusiasts