Quantcast
AWD - Successful Bevel Gear Rebuild

Volvo AWD V70-XC70 Forum

INDEX FOR 7/2019(CURRENT) INDEX FOR 4/2006 V70-XC70 INDEX [<<]  [>>]

 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE   A    A 

Successful Bevel Gear Rebuild V70-XC70 1998

Many thanks for posting this. I actually had to move my 98 v70 to light duty after the bevel gear gave up recently on my wife's wagon at about 190k miles. I actually ended up buying my first non volvo in many years...

In my case it was making an awful grinding noise when turning. For now, I have disconnected the driveshaft, but want to get into the gear and check it out.
I do have a spare gear from a 1999, it has a different flange on the output. Some guys in VS suggested changing the flange and I think I will do that, and that's where the sleeve would come into play...
I will open up the spare one and re-seal, install the vent and all that.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 5 Successful Bevel Gear Rebuild [V70-XC70][1998]
posted by  jadnhm  on Sat Sep 18 16:01 CST 2010 >

Cut and paste link:

<< < > >>


Users marked in green are currently online.

©Jarrod Stenberg 1997-2016. All material except where indicated.


Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.

All participants agree to these terms.
Powered by Denizen - Custom Software for Enthusiasts