http://www.brickboard.com/PICKNPULL/ The Volvo owner's resource since 1997. en Copyright 1997-2008, Jarrod Stenberg Sat, 6 Sep 2008 23:09 GMT Sat, 6 Sep 2008 23:09 GMT brickadmin@denizen.net brickadmin@denizen.net volvo 120 http://www.brickboard.com/images/logo_b_25.gif http://www.brickboard.com/ 25 25 The Volvo owner's resource since 1997. Anybody know of any good pick n pulls in western Mass? I'm looking for 745 parts, and a good used transmission (AW70)%0D%0A%0D%0A Thanks,%0D%0A Chris http://www.brickboard.com/PICKNPULL/volvo/1298247/pick_n_pull_western_mass.html?rss=1 Thu, 28 Aug 2008 00:09 GMT Hi there--As a fellow resident of western Mass., I've had good luck finding Volvo parts at Amherst Towing and at Highway Auto Salvage in Northampton. The latter will charge you more, but seems to have more cars. http://www.brickboard.com/PICKNPULL/volvo/1298423/pick_n_pull_western_mass.html?rss=1 Thu, 28 Aug 2008 21:58 GMT I just bought a 1990 740 turbo wagon with a Sunroof, but the head liner is a mess€%0D%0AAny idea€™s on the best way to get this replaced? With the SR it looks to be a tuff job%0D%0A%0D%0A http://www.brickboard.com/PICKNPULL/volvo/1296402/head_liner.html?rss=1 Mon, 18 Aug 2008 21:44 GMT Actually,it's not going to be that tuff.Remove reaer-view,sun-visor,coat-hooks,etc.Your over head light assembly should pop out,but may have a screw to take out first.Remove everything but the headliner.Next,gently remove headliner,you may have clips,adhesive holding it in place.(I don't know for yours,I gotta 89 780 turbo).Depending on which is easier,drop and slowly walk out your front or back door.Do not get wet,or rest on something that can warp,chip bend.Now ur sunroof!Your sunshade will be a bit easier,do same with it.At this time ,if your SR motor is acting up,or burned out,replacing it will be a snap.Pick out some fabric somewhere,a can of 3M spray adhesive,a plastic putty nife,and new razor blade.''Shave your headliner with the plastic scraper to remove any old trash left.If you get it all the way down to the plastic,clean with alcohol.If it's the cardboard kind,shave it smooth,dust off.Repeat with your sunshade.Keep in mind to flip your side that is gonna show-upside down on your headliner.Trace it a little big,cut out,spray adhesive on ur liner,roll smoothly.If you got a paint roller for corners,I think it's a 4 inch pad on it,these are perfect!Put pressure but don't push too hard because the liner can break.let dry,1 hour,trim liner material.Get ur razor blade handy to notch any screw holes for your light assembly,visors,etc.When ur satisfied,reinstall.Please keep in mind a thiner fabric will look better,but a thicker fabric will be more forgiving and will kink less.OR,you could paint your headliner.Remove,sand,clean,primer,paint whatever color!Hope this helps http://www.brickboard.com/PICKNPULL/volvo/1297562/head_liner.html?rss=1 Sun, 24 Aug 2008 15:05 GMT Many thanks.....that was so helpful http://www.brickboard.com/PICKNPULL/volvo/1297922/head_liner.html?rss=1 Tue, 26 Aug 2008 15:34 GMT Looking for and IPD VX Cam for my N/A b230 (!990 240 DL) http://www.brickboard.com/PICKNPULL/volvo/1297269/volvo_240_ipd_vx_cam.html?rss=1 Fri, 22 Aug 2008 22:54 GMT Consider an 'A' cam instead. Some people say they are better than the VX, some say they are not quite as good, but the undeniable fact is that they are a LOT better than the stock 'M' cam, and they are cheap and widely available. Here is a place you can buy the 'A' cam, and an adjustable cam gear if you want one: http://www.avalancheperformance.com/products.htm%0D%0A%0D%0AThe proprietor is an active member of the Volvo community, both on Turbobricks and here on the Brickboard.%0D%0A%0D%0AHe was my only choice: I have a '93 with the round tooth timing gears, and IPD does not make the adjustable gear for the '93. I've been very happy with my 'A' cam, it pulls a lot harder than the 'M', has a wider powerband, and only lost me between 1 and 2 mpg - and even then it is probably just because I use the extra power.%0A--%0A'93 244: 'A' cam 4 deg. advanced, 25/22 sways, custom heim endlinks, fully converted to poly bushings, HD springs front, wagon springs rear. http://www.brickboard.com/PICKNPULL/volvo/1297303/volvo_240_ipd_vx_cam.html?rss=1 Sat, 23 Aug 2008 02:35 GMT Not having a 740, I cannot help with that. However I have seen posts addressing your problem - in the RWD forum. Post over there and see if you get some good results.%0D%0A%0D%0ARegards,%0D%0A%0D%0ABob%0D%0A%0D%0A:>) http://www.brickboard.com/PICKNPULL/volvo/1296427/head_liner.html?rss=1 Mon, 18 Aug 2008 23:30 GMT Many Thanks http://www.brickboard.com/PICKNPULL/volvo/1297008/head_liner.html?rss=1 Thu, 21 Aug 2008 20:33 GMT 2 Moog Ball Joints(new)#270477 for a 960 and set of albany brakes, asking 50$ plus actual shipping.%0D%0A%0D%0ALocated in Crystal Lake, Il%0D%0A%0D%0ALGAFF%0D%0A http://www.brickboard.com/PICKNPULL/volvo/1292111/ball_joints_brakes960.html?rss=1 Mon, 28 Jul 2008 01:59 GMT Email sent about the ball joints.%0A--%0A'80 DL 2 door, '89 DL Wagon http://www.brickboard.com/PICKNPULL/volvo/1295706/ball_joints_brakes960.html?rss=1 Fri, 15 Aug 2008 05:59 GMT I have 4 hydra's on my car and want a full size spare. I know hydra's can be found for like... 180$ because that's what I paid for a replacement when one of mine cracked when I was 18. %0D%0AI happened upon one and didn't get it because I didn't want to try to sell it on Ebay, etc. and thought my spare would fit the front (some alloy wheel that won't fit my monster front Girling ABS calipers).%0D%0A%0D%0AAnyway, if I see any at PickNPull, I'll pick them up if anyone wants them and sell them at like cost+shipping+20 bucks, which I think would be way under 100 bucks. The alloy wheels at PnP are like 16$ around here.%0D%0AI'd appreciate it if anyone else would do the same or let me know if they want one (or if I'm being a jerk asking for 20$ to go to the trouble) or whatever.%0D%0A%0D%0A-Will%0D%0A%0D%0A--%0D%0A1990 740 Turbo, on its way to stock specs, maybe beyond http://www.brickboard.com/PICKNPULL/volvo/1290890/hydra_wheels.html?rss=1 Mon, 21 Jul 2008 06:33 GMT I have an interest in finding a set of Hydra's. Let me know if you do come across some.%0D%0A%0D%0A Thanks Dave%0A--%0A 92-944t 257K, 94-855 193K, 95-945 165K, 98-V70XC 160K http://www.brickboard.com/PICKNPULL/volvo/1294513/hydra_wheels.html?rss=1 Fri, 8 Aug 2008 20:26 GMT Hi Dave,%0D%0A%0D%0AI'm in St. Louis, and I have a set of four Hydra wheels that I am willing to part with. I have three '90 745's, and have stayed with the 15 inch Rigel wheels and steel rims for the snow tires for the cars, so I have no use for the Hydras.%0D%0A%0D%0AI had the Hydras checked recently when I put new tires on a set of Rigels. Cosmetically, they are all very good-to-excellent. Two spin up straight and true, one needs a minor backside repair, and one needs a moderate backside wobble fixed. I do not have the center caps.%0D%0A%0D%0ALet me know if you are interested.%0D%0A%0D%0ARandall%0D%0A http://www.brickboard.com/PICKNPULL/volvo/1294899/hydra_wheels_available.html?rss=1 Mon, 11 Aug 2008 02:38 GMT I got this car to do a V-8 swap but never got to it. The V-6 engine and trans are gone but the body and interior parts are available. It is silver with black leather interior. Body is in good shape, It has the heated mirrors and power seats. It is located in Nicholasville, KY You may reach me at cewright91@aol.com or call 859-492-6578. Call soon, my wife wants her driveway back ! I can ship small items http://www.brickboard.com/PICKNPULL/volvo/1293432/parting_87_760.html?rss=1 Sun, 3 Aug 2008 14:08 GMT AC on/off when it wants. Mechanic says the compressor is working but the clutch needs to be replaced since it is on its way out. Volvo won't sell just the clutch but the total package instead. Looking at a possible 1300$ tab for AC. Any alternate suggestions? Used parts?%0D%0A%0D%0AThanks! http://www.brickboard.com/PICKNPULL/volvo/1287207/compressor_99_v70.html?rss=1 Thu, 3 Jul 2008 18:02 GMT I have an extra compressor for your car. I ordered the wrong one, I have a 98 s70 and this one is for the 99. I would like $115 for it if you still need one. http://www.brickboard.com/PICKNPULL/volvo/1293289/compressor_99_v70.html?rss=1 Sat, 2 Aug 2008 21:53 GMT Can anyone recommend a a pick n pull a reasinable drive from Lebanon NH? http://www.brickboard.com/PICKNPULL/volvo/1293058/picknpulls_near_lebanonhanover_nh.html?rss=1 Fri, 1 Aug 2008 17:23 GMT Bought my first 740 in Colorado. It will need a lot of parts. Any suggestions on places to get parts in Colorado? http://www.brickboard.com/PICKNPULL/volvo/1291862/pick_n_pull_near_fort_collins_denver_co.html?rss=1 Sat, 26 Jul 2008 14:31 GMT Colorado Auto Parts, near Santa Fe and Oxford has usually a good number of 240's and 740's.%0D%0ADan http://www.brickboard.com/PICKNPULL/volvo/1292035/pick_n_pull_near_fort_collins_denver_co.html?rss=1 Sun, 27 Jul 2008 17:36 GMT Thanks for the suggestion. This place appears to be new but I went down there today and got a alternator, fuel pump, amm, plus alot of little parts for $48.00. They had 17 240s and 740s. Save some parts for me but feel free to check them out. http://denver.upullandpay.com/ http://www.brickboard.com/PICKNPULL/volvo/1292760/pick_n_pull_near_fort_collins_denver_co.html?rss=1 Thu, 31 Jul 2008 03:47 GMT I have a 1990 740 Turbo Wagon that isn't running properly. It seems like its not hitting on all 4 cylinders, but it does have good compression across them. So I decided I am not going to put any more time into this car other than to take parts from it that I want, and I am offering all else at great prices to anyone who can make the trip to Clifton Park, NY (just north of Albany). I would also sell the car 100% complete for $850. It shows 165kmi on the dash, has NO RUST, even has Solid floors. Perfectly Mint Leather front seats, black interior. New windshield. Nice Turbo Hydra 16" alloys with tires that have Lots of tread(selling for $250). Has the third seat that looks like it has never been opened. Lots more. I would also trade for a 140 series car, or a 122. If I do start parting out the 740 I will only ship parts that can be removed in 5 minutes or less, and figure shipping to be at least $9 min. I don't have a lot of time to strip everything, which is why I am not fixing the car to drive it. Ask any questions. http://www.brickboard.com/PICKNPULL/volvo/1288515/1990_740_turbo_wagon_parts_whole.html?rss=1 Wed, 9 Jul 2008 22:26 GMT I think I may have the car sold as a whole. I will post a follow-up asap. http://www.brickboard.com/PICKNPULL/volvo/1291148/1990_740_turbo_wagon_parts_whole_trades_albany_ny.html?rss=1 Tue, 22 Jul 2008 15:16 GMT Car is gone. http://www.brickboard.com/PICKNPULL/volvo/1292592/1990_740_turbo_wagon_parts_whole_trades_albany_ny.html?rss=1 Wed, 30 Jul 2008 14:53 GMT Need an ECM for a 1993 volvo 960 wagon. http://www.brickboard.com/PICKNPULL/volvo/1291418/need_1993_960.html?rss=1 Thu, 24 Jul 2008 01:38 GMT I am looking for a replacement electric radiator cooling fan which is the unit in front of the radiator if you sold this item how much would you ask? It is secured by four screws and takes very little time to remove. http://www.brickboard.com/PICKNPULL/volvo/1290961/1990_740_turbo_wagon_parts_whole_trades_albany_ny.html?rss=1 Mon, 21 Jul 2008 18:10 GMT I didnt take any pictures, but I will tell you about the car. Its red, the paint is oxidized, but it would probably buff out nicely. The hood has a few light dings, the rest of the body is in excellent condition, looks original with no bodywork ever. Needs the driver side marker lens replaced(about $15), and the passenger side cargo area glass is broken, and there is tape residue around the window. I only drove the car up and down the street, but I didnt notice any problems. Headliner cloth is off. Someone put alot of money into this car trying get it running properly, unfortunately that money was spent on a mechanic who didnt know Volvos well enough to fix it. Has a new Bosch cap, and I assume a new rotor, new fuel pressure regulator, has r-134 air conditon conversion done. Windshield looks like it was just replaced, not a bit of rash on it. Dash stereo area is apart because of the needed access to the relays. I think everything is there except the radio. Supposedly the car was never driven in winter, which may be true because these cars rot away underneath here in the NE, and this car looks completely solid .This cars time as a whole car is very limited. I intend on getting rid of it before July is out. If anyone has interest in the whole car let me know ASAP. Bring a trailer, drive the Volvo on it and take it away for $600, but act fast, I am going to start hacking it apart later this week. http://www.brickboard.com/PICKNPULL/volvo/1289095/1990_740_turbo_wagon_parts_whole_trades_albany_ny.html?rss=1 Sat, 12 Jul 2008 15:56 GMT I might be interested in ONE of the four hydras, but I know people will rarely break up a set.%0D%0A%0D%0A-Will%0A--%0A1990 740 Turbo, on its way to stock specs, maybe beyond http://www.brickboard.com/PICKNPULL/volvo/1290891/1990_740_turbo_wagon_parts_whole_trades_albany_ny.html?rss=1 Mon, 21 Jul 2008 06:39 GMT Pedal assembly is like new. The Shifter Bezel is 8 out 10 because one side the hand break brush fuzz is missing where the brake rests. http://www.brickboard.com/PICKNPULL/volvo/1289270/700_m46_manual_transmissin_pedal_assy_console_shifter_trim.html?rss=1 Sun, 13 Jul 2008 14:06 GMT any chance of sending a photo?%0D%0AWhat color is it ?%0D%0AHow is the Body and overall basic moving parts other then the engine tranny axels bearings steering etc?%0D%0AThanks%0D%0Aal http://www.brickboard.com/PICKNPULL/volvo/1288791/1990_740_turbo_wagon_parts_whole_trades_albany_ny.html?rss=1 Fri, 11 Jul 2008 01:36 GMT Looking for a flywheel out of a regina car with manual trans. Albeit rare, there supposedly were some 7 series regina cars in 89 and 90 that came with manual. http://www.brickboard.com/PICKNPULL/volvo/1286389/flywheel_regina_car.html?rss=1 Sun, 29 Jun 2008 23:04 GMT Are you still looking? I may be able to get you one. http://www.brickboard.com/PICKNPULL/volvo/1287369/flywheel_regina_car.html?rss=1 Fri, 4 Jul 2008 13:01 GMT I'm still looking, if you know of(or can get one) let me know. http://www.brickboard.com/PICKNPULL/volvo/1287693/flywheel_regina_car.html?rss=1 Sun, 6 Jul 2008 00:46 GMT Has an auto trans that is hooked up to a B230F. I will provide pics of ANYTHING you want to buy - just ask me! I picked up the car for a good price, so I don't mind letting these parts go to fellow enthusiasts at a reasonable price (perhaps free if I'm in a good mood and don't have to ship it ;)%0D%0A%0D%0AWhat IS available:%0D%0A- Auto trans (not sure on the model, but its an AW w/ 3+OD. Worked fine while I was driving the car home but the OD would get stuck off on when you deactivated it (I blame chassis electrical, not mechanical I think)%0D%0A- Misc. Interior parts%0D%0A- Seats (rears are the only ones that are good - the front bottoms are worn but the seatbacks seem to be fine).%0D%0A- Body trim%0D%0A- Doors%0D%0A- Windows%0D%0A- any wagon-specific parts%0D%0A- Catalytic converter%0D%0A- any smog stuff%0D%0A- Pretty much anything else not listed below... if in doubt, just ask me!%0D%0A%0D%0AWhat is NOT available:%0D%0A- Anything under the hood (I'm swapping this motor into my '75 244)%0D%0A- ECU, VAC, Fuel system, etc.%0D%0A- Steering system%0D%0A- AC system%0D%0A- I want to keep the car a rolling chassis so I can get it out of my garage and on the street when the wrecker finally comes to pick it up, so no struts or suspension goodies.%0D%0A%0D%0AContact - email psteen244@mac.com and let me know what you want or you can post back here!%0D%0A%0D%0A(Coming soon will be a running B20 + M41 if anyone is interested, let me know and I'll keep you updated as to when I get it pulled from the '75.)%0D%0A%0D%0AThanks,%0D%0APhil%0A--%0A75 244GL, 85 245DL (parts), 96 Toyota Land Cruiser http://www.brickboard.com/PICKNPULL/volvo/1280622/parting_85_245.html?rss=1 Sat, 31 May 2008 23:46 GMT Does it have a couple of plastic clips in the roof rail (inside) right above the side windows? If so, I can use them. They hold the dog gate up in the retracted position.%0D%0A%0D%0ABill%0A--%0AThose who beat their swords into plowshares will surely plow for those who did not. http://www.brickboard.com/PICKNPULL/volvo/1284749/parting_85_245.html?rss=1 Sat, 21 Jun 2008 17:00 GMT Broken, sorry.%0D%0A%0D%0A-Phil http://www.brickboard.com/PICKNPULL/volvo/1287484/parting_85_245.html?rss=1 Fri, 4 Jul 2008 20:59 GMT Sorry for the lag time guys... I just moved and don't have internet. I'll be looking into each of your parts this weekend and getting back to you.%0D%0A%0D%0AThanks,%0D%0APhil%0A--%0A75 244GL, 85 245DL (parts), 96 Toyota Land Cruiser http://www.brickboard.com/PICKNPULL/volvo/1287098/parting_85_245.html?rss=1 Thu, 3 Jul 2008 03:35 GMT Hi folks,%0D%0A%0D%0AI've got a 1987 740GLE sedan, and I need to build up my pantry of replacement parts - unfortunately I'm not near any picknpulls (rural NC). I need mostly electrical parts.%0D%0A%0D%0AMy withlist of spares includes:%0D%0A%0D%0AFuel pump relay%0D%0AFI relay%0D%0AAux fan relay%0D%0AFuel pressure regulator%0D%0A%0D%0AIf y'all might be able to help me, I'd appreciate it. Email me at fyreandearth@gmail.com. %0D%0A%0D%0AThanks!%0D%0A%0D%0AAri http://www.brickboard.com/PICKNPULL/volvo/1286575/building_auto_pantry_need_parts_744gle.html?rss=1 Mon, 30 Jun 2008 16:59 GMT %0D%0AI'd prefer central PA, but I'd also like to hear about others anywhere in the state (or in New Jersey or surrounding states.) %0D%0A%0D%0AAll I know of now is Harry's U-Pull it in Hazelton, etc.%0D%0A%0D%0AThanks!%0D%0A%0D%0ASchwied http://www.brickboard.com/PICKNPULL/volvo/1277133/junkyards_pennsylvania.html?rss=1 Wed, 14 May 2008 04:45 GMT You can try Bob Cossell U-Pull-It, which has two locations in the western part of the state. One is in Dawson, Fayette County, and the other is in West Alexander in Greene County, just near the WV border. I've had decent luck finding 240 parts for my own cars, and for other members of the BB, at the Dawson location.%0D%0A%0D%0Ahttp://www.bobcossellsupullit.com/%0D%0A%0D%0A%0D%0AIn the Pittsburgh area, you can try Millerstown Pick-A-Part in Tarentum. I haven't been here yet, but the inventory list shows a few Volvos:%0D%0A%0D%0Ahttp://www.picapartyard.com/%0D%0A%0D%0A%0D%0AThere is also a newcomer in the area...a DIY salvage yard just off US Route 22 west of Blairsville. I'll be heading to Pittsburgh from State College this weekend, and will get the contact info and post it here.%0D%0A%0D%0AHappy hunting!%0D%0A http://www.brickboard.com/PICKNPULL/volvo/1286527/junkyards_pennsylvania.html?rss=1 Mon, 30 Jun 2008 12:47 GMT 400,000 km five cylinder turbo five speed.%0D%0A%0D%0AEverything is up for grabs starting July 2.%0D%0A%0D%0AI will NOT ship small parts. Pick-up (just north of Pearson Airport) only.%0D%0A%0D%0Aemail ab7225 'at' gmail 'dot' com for info. http://www.brickboard.com/PICKNPULL/volvo/1286098/parting_96_850_sedan_toronto.html?rss=1 Sat, 28 Jun 2008 14:41 GMT Looking for the owners manual for a 1996 volvo 850 GTL? Do u have one?%0D%0A%0D%0AIf so, email///%0D%0A%0D%0Athanks http://www.brickboard.com/PICKNPULL/volvo/1286119/parting_96_850_sedan_toronto.html?rss=1 Sat, 28 Jun 2008 17:24 GMT Hello,%0D%0A%0D%0ATo those who may be interested, I have accumulated a number of wrecked Volvo 240 sedans and wagons and would like to sell parts from them, including the engines, transmissions, body parts, interior parts, etc. The cars are located in central NJ and are as follows: 1986 244 black sedan, 1989 244 silver sedan, 1990 245 blue/green wagon. I also have parts from several older 240's that I had previously dismantled, including fenders, doors, seats, grills, etc., and even have a collection of 740 parts. I would prefer that large parts be picked-up rather than shipped. If there is something you may be interested in, please reply and I will see if I have it. All will be sold at very reasonable prices, and if you take the part off yourself, I'll give you a better price.%0D%0A%0D%0AThanks,%0D%0A%0D%0AAlex http://www.brickboard.com/PICKNPULL/volvo/1281666/parting_several_240s_nj.html?rss=1 Fri, 6 Jun 2008 11:48 GMT hi Alex,%0D%0A%0D%0AI'm needing an instrument cluster for my 86 model. I think they call it a combination meter now, I used to call it a dash panel back when things were simpler. what would you charge me for one, if you have it.I'd have to have it shipped, since I'm in Oregon.%0D%0A%0D%0Abest wishes, Tom http://www.brickboard.com/PICKNPULL/volvo/1285890/parting_several_volvo_240s_nj.html?rss=1 Fri, 27 Jun 2008 05:03 GMT Anyone know where I can get a radio for my Volvo and also looking for wheels. http://www.brickboard.com/PICKNPULL/volvo/1285868/volvo_240_parts_wanted.html?rss=1 Fri, 27 Jun 2008 02:18 GMT Does the '89 sedan still have the manifold to cat pipe, the catalytic convertor and o2 sensor? I am in desperate need of these parts for my own '89, and would be willing to drive from Richmond, VA to pick them up. %0D%0A%0D%0AI'm also looking for a passenger's side fender in good condition, two tail lights that would pass inspection, the sound deadening from under the shifter boot on a manual trans and various trim pieces/fittings.%0D%0A%0D%0APlease send me an email at tsakach (shift + 2) vt.edu%0D%0A%0D%0AThanks,%0D%0ATom http://www.brickboard.com/PICKNPULL/volvo/1285639/parting_several_volvo_240s_nj.html?rss=1 Wed, 25 Jun 2008 19:42 GMT Good Morning,%0D%0A%0D%0AI live in the Philly area and would be happy to drop by and take some parts off your hands if the prices are reasonable. I'm looking for some relatively minor and perhaps less sought after items. Most notably, i was in need of the rubber guide channels (full piece that goes all the way around the window and down inside the door panel) for both front and rear driver side windows. I'd also be interested in a couple of the rubber scrapers from the base of the windows. Might also be interested in some rear corner trim or some minor pieces from the interior. Let me know if any of these things are available, specifically the rubber guide channels and what price you might want to receive for them and i'd be interested in arranging a time to drop by and remove them from the car(s). %0D%0A%0D%0ALastly, there wouldn't happen to be a set of Corona wheels in decent condition on any of these, would there?%0D%0A%0D%0A%0D%0AThanks,%0D%0ADave http://www.brickboard.com/PICKNPULL/volvo/1285569/parting_several_volvo_240s_nj.html?rss=1 Wed, 25 Jun 2008 15:15 GMT This is a Mercedes board. This is happening in real time check it out.%0D%0A%0D%0Ahttp://forums.mbworld.org/forums/showthread.php?t=244457 http://www.brickboard.com/PICKNPULL/volvo/1280179/scam_alert_great_story_following.html?rss=1 Thu, 29 May 2008 15:50 GMT A-mazing :) http://www.brickboard.com/PICKNPULL/volvo/1285015/scam_alert_great_story_following.html?rss=1 Mon, 23 Jun 2008 01:57 GMT Hi, Does anyone know where I can get a set of used (preferably un-pitted) swaybars for my 245? Thanks, Charles http://www.brickboard.com/PICKNPULL/volvo/1284850/looking_set_front_rear_ipd_25mm_swaybars_245_reasonable_price.html?rss=1 Sun, 22 Jun 2008 03:56 GMT Use the text input below to search brickboard.com query http://www.brickboard.com/FIND/