Volvo TOOLBOX Forum

INDEX FOR 11/2008(CURRENT) INDEX FOR 6/2008 INDEX (NO RELOAD) [<<] [>>]

VIEW

READ ONLY

SAVE

Counterhold tool info

posted by Andrew in AL on Sun Jun 15 06:12 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS]

[IGNORE ALL POSTS]

last visit: Wed Oct 29 19:30 CST 2008

[RELATED]

Since this is 'toolbox', I thought it a good place to post this info.
When buying a counterhold tool to remove the lower pulley on your brick, be sure and DO NOT buy one like #1, unless you want to modify it. The single round hole prevents use on some harmonic balancers, or makes it near impossible. Now go on to the second pix.
#1

#2. This one is from IPD. Note the elongated hole at the top. This design makes it easy to slide the tool over the tensioner bolt and at the same time engage the pawls in the pulley below.

Select, copy to buffer, and paste anywhere:

<< < > >>

Users marked in green are currently online.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.