RWD - Are we sure it's pin 13 and 5?
                    

Volvo RWD 700 Forum

INDEX FOR 11/2009(CURRENT) INDEX FOR 1/2004 700 INDEX INDEX (NO RELOAD) [<<]  [>>]

 VIEW    READ ONLY Replies to this message will be emailed.    PRINT   SAVE   A    A 

Are we sure it's pin 13 and 5? 700 1986

On the 240 LH 2.2 the ECT is measured from pin 2 to ground, per the Bentley manual and my own notes. Nominal resistance ar 68°F is 2,280—2,720 ohms.

The LH 2.4 and 3.1 use pin 13 and ground/pin 5.
--
Bruce Young,
'93 940-NA (current), '80 GLE V8 (Sold), '86 240dl, '85 244 ti, '83 245t
'76 244 (R.I.P at 255k), 73 142 (98K), '71 144 (ex circle track car)
Used '70 144 from '78 to '92, New 144 from '67 to '78, Used '62 122 from '63 to '67




Select, copy to buffer, and paste anywhere:


[about brickboard ads]

THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD
New Are we sure it's pin 13 and 5? [700][1986]
posted by  TJAM2K3  on Wed Jan 28 07:34 CST 2004 >


[about brickboard ads]

<< < > >>


Users marked in green are currently online.

©Jarrod Stenberg 1997-2007. All material except where indicated.


Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.

All participants agree to these terms.
Powered by Denizen - Custom Software for Enthusiasts