• ALL
• 444-544
• 120-130
• 1800
• 140-160
• 200
• 300
• 700
• 900
• S90-V90

Volvo RWD 700 Forum

INDEX FOR 11/2009(CURRENT) INDEX FOR 1/2004 700 INDEX INDEX (NO RELOAD) [<<]  [>>]

VIEW    READ ONLY    PRINT   SAVE   A    A  Are we sure it's pin 13 and 5? 700 1986 posted by  TJAM2K3 on  Wed Jan 28 07:34 CST 2004 Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS]     [IGNORE ALL POSTS] [RELATED] I have a 1986 740 GLE. My problem is with testing the ECT at the LH Jetronic unit. I read in the FAQ's that I should test my values at pin 13 and 5 of the connector. 13 on my unit is a thick gray wire that goes to the grounding side of my injectors. My ECT wiring goes through the firewall on the driver's side and then into the control module by the brake pedal. I assume it goes from there to the LH but Im not sure which wires carry it there. My question is simple. Is someone POSITIVE that I should be checking 13 and 5. If not, which pins should I use? Mark this post as an answer to my question<- Use this feature to mark quality replies to your post. Select, copy to buffer, and paste anywhere: <a href="http://www.brickboard.com/RWD/volvo/744342/740/760/780/sure_pin_13_5.html ">Are we sure it's pin 13 and 5?</a>

[about brickboard ads]

THREADED

THREADED EXPANDED

FLAT

PRINT ALL

• Are we sure it's pin 13 and 5? [700][1986]
  posted by  lucid  on Wed Jan 28 17:04 CST 2004 > V

• Are we sure it's pin 13 and 5? [700][1986]
  posted by  mgarageu  on Wed Jan 28 13:01 CST 2004 > V

• Are we sure it's pin 13 and 5? [700][1986]
  posted by  someone claiming to be Steve  on Wed Jan 28 09:27 CST 2004 > V

©Jarrod Stenberg 1997-2007. All material except where indicated.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.