RWD - 2 tight plugs......

Volvo RWD 200 Forum

INDEX FOR 3/2010(CURRENT) INDEX FOR 11/2009 200 INDEX INDEX (NO RELOAD) [<<]  [>>]

 VIEW    READ ONLY Replies to this message will be emailed.    PRINT   SAVE   A    A 

2 tight plugs...... 200 1990

You might try slithering a little Kroil or PB Blaster down in the hole. And, incredibly enough, I have SOMETIMES had luck tightening the plug just a smidge before trying to loosen it. Anything that you can do to break that bond between the aluminum head and whatever coating is on the plug will help, obviously. You might even try warming up the engine and spray a little of that freeze spray that's used for finding cold solder joints in electronics boards onto the base of the plug. Otherwise, I see some heli-coil inserts in your future. Good luck!




Select, copy to buffer, and paste anywhere:


[about brickboard ads]

THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD
New 2 tight plugs...... [200][1990]
posted by  89745GL  on Wed Nov 18 00:19 CST 2009 >


[about brickboard ads]

<< < > >>


Users marked in green are currently online.

©Jarrod Stenberg 1997-2007. All material except where indicated.


Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.

All participants agree to these terms.
Powered by Denizen - Custom Software for Enthusiasts