Volvo RWD 200 Forum
INDEX
200 INDEX
INDEX (NO RELOAD)
[<<]
[>>]
posted by
punk240
on
Wed Nov 4 17:45 CST 2009
Author:
[PROFILE]
[EVERY POST]
[THREADS]
[BEST POSTS]
[IGNORE ALL POSTS]
last visit: Tue Nov 17 13:21 CST 2009
[RELATED]
|
|
I've mounted a 9 bulb strip of LED's to supplement the crappy lighting in the cluster. I was using a 1987 cluster as a model to experiment with and the power source coming from the 13mm two-piece bulb for the original lights that light up the cluster. Now I am trying to mount the facia of the 1987 cluster to my car which is a 1992 cluster... I'm finding that my plan is back-firing cuz the 1992 cluster uses a 10mm one-piece halogen bulb of which i cannot diassemble. I've read and confirmed that the bulb sockets for the circuit board are not the same diameter.... Scraping the power source...
Anyone know of a power source on the circuit board I could tap into?
Cluster #K40168
My last resort is to use a longer wire to attach to the light dimmer... But i really wanna keep the modulation of the cluster for in case I remove it again.
Any ideas?
Tim
--
'92 244 NOW w/ M47 (Hydra, turbo bars, bilstein, urethane bushings)
|
Select, copy to buffer, and paste anywhere:
|
[about brickboard ads]
|
LED Cluster conversion 90% finished [200]
posted by
punk240
on Wed Nov 4 17:45 CST 2009 >
V
-
LED Cluster conversion 90% finished [200]
posted by
Jorrell
on Wed Nov 4 18:15 CST 2009 >
V
-
LED Cluster conversion 90% finished [200]
posted by
benski
on Thu Nov 5 09:52 CST 2009 >
V
Users marked in green are currently online.
©Jarrod Stenberg 1997-2007. All material except where indicated.
Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.