RWD - '86 244--Good year or bad year for wiring harness?

Volvo RWD 200 Forum

INDEX FOR 3/2010(CURRENT) INDEX FOR 9/2009 200 INDEX INDEX (NO RELOAD) [<<]  [>>]

 VIEW    READ ONLY    PRINT   SAVE   A    A 

'86 244--Good year or bad year for wiring harness? 200 1986

Good, cause now you'll have the opportunity to put a harness on that engine. You'll be able to boast about it for years to come. Really its nothing more than unplug, pull, and reroute and plug em in. The injectors are sort of tricky and the throttle switch clip can be confused with the Idle Control valve. Just put tape around such clips and mark them during removal. Compare harness before installation and you'll have a better time.

$125- $150 for a harness on ebay. Look the little metal clips inside the "clips" for any stretched open little metal clips like at the AMM. That one caused me a couple years of wondering what was wrong with my car.




Select, copy to buffer, and paste anywhere:


[about brickboard ads]

THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD
New '86 244--Good year or bad year for wiring harness? [200][1986]
posted by  JMC2041  on Sat Sep 26 19:56 CST 2009 >


[about brickboard ads]

<< < > >>


Users marked in green are currently online.

©Jarrod Stenberg 1997-2007. All material except where indicated.


Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.

All participants agree to these terms.
Powered by Denizen - Custom Software for Enthusiasts