RWD - gear box brass plug and clutch
                    

Volvo RWD 700 Forum

INDEX FOR 11/2009(CURRENT) INDEX FOR 7/2009 700 INDEX INDEX (NO RELOAD) [<<]  [>>]

 VIEW    READ ONLY Replies to this message will be emailed.    PRINT   SAVE   A    A 

gear box brass plug and clutch 700 1987

Shannon,

No luck with the bolt. I'd like to fill the gear box with oil so that I can drive down to a garage and have them work on it (probably welding something onto the bolt head). It would save me a tow.

I've stripped down the gear lever area and see a metal plate over the tubes. The metal plate has a circlip on the inside circumference. Do I pry that circlip open to expose the tube openings? Which tube goes to the gearbox? (I guess I can try to feel around there and verify.)

Thanks.




Select, copy to buffer, and paste anywhere:


[about brickboard ads]

THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD
New gear box brass plug and clutch [700][1987]
posted by  fredbyte  on Thu Jul 2 18:59 CST 2009 >


[about brickboard ads]

<< < > >>


Users marked in green are currently online.

©Jarrod Stenberg 1997-2007. All material except where indicated.


Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.

All participants agree to these terms.
Powered by Denizen - Custom Software for Enthusiasts