• ALL
• 444-544
• 120-130
• 1800
• 140-160
• 200
• 300
• 700
• 900
• S90-V90

Volvo RWD 900 Forum

INDEX FOR 3/2010(CURRENT) INDEX FOR 7/2009 900 INDEX INDEX (NO RELOAD) [<<]  [>>]

VIEW    READ ONLY    PRINT   SAVE   A    A  Hub nut takes a 36mm socket... 900 1992 posted by  lucid on  Sun Jul 5 07:19 CST 2009 Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS]     [IGNORE ALL POSTS] last visit: Sun Mar 21 17:50 CST 2010 [RELATED] ...and I needed a "cheater pipe" on my 18" breaker bar to get that 2nd stage 45° angle tighten (age was a factor). -- Bruce Young, '93 940-NA (current), 240s (one V8), 140s, 122s, since '63. Mark this post as an answer to my question<- Use this feature to mark quality replies to your post. Select, copy to buffer, and paste anywhere: <a href="http://www.brickboard.com/RWD/volvo/1358239/940/960/980/V90/S90/hub_nut_takes_36mm_socket.html">Hub nut takes a 36mm socket...</a>

[about brickboard ads]

THREADED

THREADED EXPANDED

FLAT

PRINT ALL

• Hub nut takes a 36mm socket... [900][1992]
  posted by  lucid  on Sun Jul 5 07:19 CST 2009 > V

• Replacing Front Wheel Hubs [900][1992]
  posted by  spook  on Sun Jul 5 06:51 CST 2009 > V

• Replacing Front Wheel Hubs [900][1992]
  posted by  Steve  on Sat Jul 4 08:39 CST 2009 > V

©Jarrod Stenberg 1997-2007. All material except where indicated.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.