|
Howdy all,
I followed a trail of links from the Ferrari Chat web board to this page:
http://www.newcoproducts.com/cohline/index.htm
It looks like the stuff. The manufacturer is a company named Cohline in Germany. They supply all kinds of tubing, hoses, and fittings. Carb guys note: they also make fabric covered fuel lines. It looks like Newcoproducts may be the only distributor in the USA.
Art, I did not see the 2.4/6 (id/OD) you mentioned listed in their product line. As close as they get is 3/5, rated at 33 bar with a bend radius of 25 mm and 2/4 rated at 44 bar with a bend radius of 20 mm, both with a wall thickness of 1mm. I think one or the other might work. The specification shows + or - .3 mm ID. See page 41 of the Cohline catalog.
Google DIN 73378 or DIN 74324; there are several hits in the UK from various manufacturers. I spent some time on those web sites. The smallest ID I saw was 3/16 inch.
--
Mr. Shannon DeWolfe -- I've taken to using mister because my name misleads folks on the WWW. I am a 53 year old fat man. ;-)
|
