Volvo RWD 700 Forum
INDEX FOR 11/2009(CURRENT)
INDEX FOR 7/2009
700 INDEX
INDEX (NO RELOAD)
[<<]
[>>]
posted by
DPNY
on
Wed Jul 1 16:25 CST 2009
Author:
[PROFILE]
[EVERY POST]
[THREADS]
[BEST POSTS]
[IGNORE ALL POSTS]
last visit: Sun Oct 4 12:55 CST 2009
[RELATED]
|
|
I have no leaks and it is fully charged but it is not real cold. Only 68 degrees when measuring the inside vent.
Mechanic suggests I need accumulator. The receiver/dryer.
Installed in my 740 I have a factory retrofit from R12 to R134a.
Can anybody suggest an exact replacement accumulator receiver/dryer? An actual part number or supplier link would be most helpful. USA.
I have taken a photo and can say that from the front of the car one valve goes straight back into the interior of the car and another goes directly forward to the condenser. These two main valves are opposite each other on the accumulator.
Then on the left is a valve that has a cap and no connection. And to the right is an electric sensor connector.
The filler valve is on the pipe from the valve that leads directly back to the interior.
Thanks,
Dean
|
Select, copy to buffer, and paste anywhere:
|
[about brickboard ads]
|
AC pressure with retrofit R134a? [700][1990]
posted by
DPNY
on Tue Jun 30 19:20 CST 2009 >
V
-
AC pressure with retrofit R134a? [700][1990]
posted by
aleekat
on Tue Jun 30 19:29 CST 2009 >
V
Users marked in green are currently online.
©Jarrod Stenberg 1997-2007. All material except where indicated.
Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.