|
I swapped the interior door panels (front and rear) between a '94 960 and a '95 945, and everything matched up (except for the defrost vent holes, which I easily could have adapted). So I'm assuming the door panels for the '95 960 are identical and also will swap with no modification.
Having said that, I don't remember exactly how the inside door pull is configured. But everything inside the door panel was pretty much straight-forward, so you won't have any trouble disconnecting and reconnecting the door pulls when you get the panel loose.
There were some electrical connections for the door light, power windows, and speakers which were easily unplugged and reattached. The plug configurations for all these were identical, so no modifications were required there.
In my case, some of the power window switches on my 945 had gone bad, so I was able to change some of the switches within the power switch console, as well.
All in all, a straight-forward task to swap with no unforeseen challenges.
|
How to get into trunk, locked out. 95-964 [900][1995]