• ALL
• 444-544
• 120-130
• 1800
• 140-160
• 200
• 300
• 700
• 900
• S90-V90

Volvo RWD 200 Forum

INDEX FOR 11/2009(CURRENT) INDEX FOR 6/2009 200 INDEX INDEX (NO RELOAD) [<<]  [>>]

VIEW    READ ONLY    PRINT   SAVE   A    A  two steps 200 posted by  trichard on  Wed Jun 17 12:13 CST 2009 Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS]     [IGNORE ALL POSTS] last visit: Sun Nov 22 08:20 CST 2009 [RELATED] 1. oil all parts of the moving sections of the hinge WELL 2. to lower the back corners notice on the section of the hinge which bolts to the frame NOT hood there is small section which affixes to the frame bolted part by a square teat through a punched out section and the back part of this piece has a bolt through an elongated punched out section. it is this bolt which you need to adjust to its most downward position to get the hood to retract downwards. be aware as son as you loosen this bolt the spring will cause this bolt to ride up in this elongated section. to counteract this and force it down as far as it will go you need help or be able to conjure one arm to the front of the open hood and pull down and back wards like a lever to force the spring and bolt to move down to the bottom of its slot. at the same moment tightening the bolt once it can go no lower. it is actually easy once you get the motions needed Mark this post as an answer to my question<- Use this feature to mark quality replies to your post. Select, copy to buffer, and paste anywhere: <a href="http://www.brickboard.com/RWD/volvo/1354871/220/240/260/280/two_steps.html">two steps</a>

[about brickboard ads]

THREADED

THREADED EXPANDED

FLAT

PRINT ALL

• 1988 240 Hood not fitting well... [200]
  posted by  wma45  on Sun Jun 21 17:23 CST 2009 > V

• here is a picture of what i refer [200]
  posted by  trichard  on Wed Jun 17 14:41 CST 2009 > V

• two steps [200]
  posted by  trichard  on Wed Jun 17 12:13 CST 2009 > V
  • two steps [200]
    posted by  MyTSwen  on Wed Jun 17 13:15 CST 2009 > V
    • two steps [200]
      posted by  benski  on Wed Jun 17 13:36 CST 2009 > V

• 1988 240 Hood not fitting well... [200]
  posted by  jfh0jfh  on Wed Jun 17 11:46 CST 2009 > V

©Jarrod Stenberg 1997-2007. All material except where indicated.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.