Volvo RWD 200 Forum

INDEX FOR 3/2010(CURRENT) INDEX FOR 3/2009 200 INDEX INDEX (NO RELOAD) [<<] [>>]

VIEW

READ ONLY

SAVE

So if the clutch fork is bending... 200

posted by transit wind on Sun Mar 1 01:57 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS]

[IGNORE ALL POSTS]

last visit: Thu Mar 18 00:24 CST 2010

[RELATED]

...the transmission has to come out and while there the pressure plate resurfaced and a new rear seal if leaking and a new pilot bearing since they are cheap? Read a post that made replacing a M46 clutch seem too much work or so the poster was told by others. One thing I don't understand is that I read about how the bell housing has to be turned 90 degrees. It that 90 degrees a twist in place or to get it out from under the car or would you even move the transmission from under the car? I think the clutch fork is bending since my new clutch cable is starting to go out of wack after a couple weeks. Sucks.

Select, copy to buffer, and paste anywhere:

THREADED

THREADED EXPANDED

FLAT

PRINT ALL

MESSAGES IN THIS THREAD

So if the clutch fork is bending... [200]
posted by transit wind on Sun Mar 1 01:57 CST 2009 >

So if the clutch fork is bending... [200]
posted by riverbend on Sun Mar 1 09:38 CST 2009 > V
- So if the clutch fork is bending... [200]
  posted by CliveAlive on Sun Mar 1 21:09 CST 2009 > V

So if the clutch fork is bending... [200]
posted by someone claiming to be stripping90 on Sun Mar 1 07:43 CST 2009 > V
- So if the clutch fork is bending... [200]
  posted by transit wind on Mon Mar 2 00:51 CST 2009 > V

[about brickboard ads]

<< < > >>

Users marked in green are currently online.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.