RWD - 1987 240 Dl died now turns over but will not start...here's my guess..
Try the improved search:                   

Volvo RWD 200 Forum

INDEX FOR 11/2008(CURRENT) INDEX FOR 8/2008 200 INDEX INDEX (NO RELOAD) [<<]  [>>]

 VIEW    READ ONLY    PRINT   SAVE   A    A 

1987 240 Dl died now turns over but will not start...here's my guess.. 200

You have a failed timing belt.

That belt fails but still looks good. The failure is that the teeth on the belt where it wraps around the drive gear shear off - leaving a smooth surface.

The acid test is to see if it moves while cranking the engine. Easy way is to have a helper look through the oil filler hole at the camshaft while you turn the key to crank the engine. If it doesn't turn the belt has failed.

Why do they fail? Oil leaks through the engine front seals (there are 3) weaken the belt, OR a camshaft bearing siezes, OR...I forget the #3 reason.

Replacing the belt is a relatively easy DIY job.

Do that test and post back.

Good Luck,

Bob

:>)




Select, copy to buffer, and paste anywhere:


[about brickboard ads]

THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD
New 1987 240 Dl died now turns over but will not start [200]
posted by  coreymon  on Wed Aug 20 11:07 CST 2008 >


[about brickboard ads]

<< < > >>


Users marked in green are currently online.

©Jarrod Stenberg 1997-2007. All material except where indicated.


Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.

All participants agree to these terms.
Powered by Denizen - Custom Software for Enthusiasts