RWD - won't start, code 1-1-1, wife shakes head
Try the improved search:                   

Volvo RWD 200 Forum

INDEX FOR 8/2008(CURRENT) INDEX FOR 7/2008 200 INDEX INDEX (NO RELOAD) [<<]  [>>]

 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE   A    A 

won't start, code 1-1-1, wife shakes head 200 1993

My 1993 245 wouldn't start with a code 2-3-1. So i replaced tank fuel pump and fuel pressure regulator. I now hear the tank pump buzz and fuel spurted out of the pressure regulator the first time i clamped it down.
It still won't start. There is no spark. I also replaced the ignition coil and tried a spare Air Mass Meter, but no start. Both computers give me just a 1-1-1 reply after trying to start it.
I'm cleaning electrical contacts wherever i find them now. In 1992, by luck, i found a crummy contact on the computer on my 1984 240 by squeezing it. I also found a tenuous contact in a three-wire white plastic connector under the glovebox on the 1984 model.
Do any of you have experience of where you found lousy contacts in a late model 240?
Or what you think i should check next? I love this car and my wife thinks euthanasia (vehicle) is preferred to towing it to a Volvo dealer. Help (please).





[about brickboard ads]

THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD
New won't start, code 1-1-1, wife shakes head [200][1993]
posted by  gamma  on Fri Jul 25 09:03 CST 2008 >


[about brickboard ads]

<< < > >>


Users marked in green are currently online.

©Jarrod Stenberg 1997-2007. All material except where indicated.


Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.

All participants agree to these terms.
Powered by Denizen - Custom Software for Enthusiasts