• ALL
• 444-544
• 120-130
• 1800
• 140-160
• 200
• 300
• 700
• 900
• S90-V90

Volvo RWD 200 Forum

INDEX FOR 8/2008(CURRENT) INDEX FOR 5/2008 200 INDEX INDEX (NO RELOAD) [<<]  [>>]

VIEW    READ ONLY    PRINT   SAVE   A    A  Ball joint install to strut plate question 200 1986 posted by  Xraybob on  Fri May 16 15:57 CST 2008 Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS]     [IGNORE ALL POSTS] last visit: Thu Aug 7 15:30 CST 2008 [RELATED] I'm installing some TRW ball joints I got from eEuroparts.com. All has gone well except when I went to tighten the cap nut to the backside of the strut plate, the nut and threaded shaft spun together once the top of the nut and the top of the threads are flush. I can push down on the plate and there is about 1/4" of play when pushed down. Is this all normal? I did put a few drops of loctite on the threads before installing the nut. Thanks in advance. -- '86 sedan with 385,000 miles on the original engine and automatic transmission Mark this post as an answer to my question<- Use this feature to mark quality replies to your post.

[about brickboard ads]

THREADED

THREADED EXPANDED

FLAT

PRINT ALL

• Ball joint install to strut plate question [200][1986]
  posted by  245DogWaggin  on Sat May 17 09:41 CST 2008 > V

• Ball joint install to strut plate question [200][1986]
  posted by  pageda ONLINE  on Fri May 16 16:06 CST 2008 > V
  • Ball joint install to strut plate question [200][1986]
    posted by  Xraybob  on Sat May 17 07:03 CST 2008 > V
    • Ball joint install to strut plate question [200][1986]
      posted by  pageda ONLINE  on Sat May 17 07:07 CST 2008 > V
      • Ball joint install to strut plate question [200][1986]
        posted by  Xraybob  on Sat May 17 07:13 CST 2008 > V
        • Ball joint install to strut plate question [200][1986]
          posted by  pageda ONLINE  on Sat May 17 07:22 CST 2008 > V
          • Ball joint install to strut plate question [200][1986]
            posted by  Xraybob  on Sat May 17 07:26 CST 2008 > V
            • Ball joint install to strut plate question [200][1986]
              posted by  pageda ONLINE  on Sat May 17 07:35 CST 2008 > V
              • Ball joint install to strut plate question [200][1986]
                posted by  Xraybob  on Sat May 17 07:45 CST 2008 > V
                • Ball joint install to strut plate question [200][1986]
                  posted by  pageda ONLINE  on Sat May 17 07:50 CST 2008 > V
                  • Ball joint install to strut plate question [200][1986]
                    posted by  Xraybob  on Sat May 17 07:54 CST 2008 > V
                    • Ball joint install to strut plate question [200][1986]
                      posted by  Xraybob  on Sat May 17 08:51 CST 2008 > V

©Jarrod Stenberg 1997-2007. All material except where indicated.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.