RWD - The Volvo Owner's Resource
                    
RWD - Discuss the classic rear wheel drive Volvos.
Stats for 11/2009
POSTS THREADS TODAY WITH REPLIES NO REPLIES
3483 585 12 541 44
LATEST POST
Has anyone put power steering on a 122
posted by Bilo on Sat, Nov 21st 2009 at 3:45 AM UST
Stats updated on Sat, Nov 21st 2009 at 4:30 AM UST
Welcome to the brickboard Volvo RWD forums. This site is custom built and tailored to Volvo enthusiasts. Your input for improvements is welcome and encouraged.
Hide Summary

POST A NEW MESSAGE


[ALL] [THUMBS UP] [NO REPLIES] [LATEST] [PASS] [MODIFIED | CREATED] [A] [A]

Showing 1 through 72 of 72 matching threads within selected month (Recently modified at Top).
1
expand thread  New Tomorrow, I seafoam
posted by  pittroj  on Wed Jul 1 20:27 CST 2009 >
(3 responses)
expand thread  New Rough idle, poor gas mileage, running out of things to try. Check my list [200]
posted by  pittroj  on Thu Jun 18 19:44 CST 2009 >
(12 responses)
expand thread  New Por-15 spill nightmares, tell your story, I always wind up wearing this stuff
posted by  pittroj  on Wed Jun 10 10:21 CST 2009 >
(6 responses)
expand thread  New Electric antenna DOA are they repairable? [200]
posted by  pittroj  on Sun May 17 19:03 CST 2009 >
(6 responses)
New Fair price for a set of 1974 164e bumpers? [140-160]
posted by  pittroj  on Fri May 29 17:43 CST 2009 >
(no responses)
expand thread  New Warped rotors (steering wheel shake) on a 1993 940
posted by  pittroj  on Mon May 25 07:43 CST 2009 >
(2 responses)
expand thread  New I was burnt for a bad used part on another forum, Recourse?
posted by  pittroj  on Fri May 22 16:20 CST 2009 >
(3 responses)
expand thread  New Seafoam, why doesn't it clog the cat, proper use? [200]
posted by  pittroj  on Mon May 18 20:11 CST 2009 >
(5 responses)
expand thread  New 940 turbo still exhibiting high crankcase pressure symptoms
posted by  pittroj  on Sun May 17 19:58 CST 2009 >
(1 response)
expand thread  New If I decide not to convert to R-134, can it still be made to work, 1991 244? [200]
posted by  pittroj  on Sun May 17 20:43 CST 2009 >
(2 responses)
expand thread  New I read the first negative review on IPD sway bars I have ever seen on IPD'S site [200]
posted by  pittroj  on Mon May 11 18:49 CST 2009 >
(30 responses)
expand thread  New Rear cam plug, is there any options to OEM plug [200]
posted by  pittroj  on Thu May 14 15:56 CST 2009 >
(3 responses)
expand thread  New Replacing front seals and timing belt with hand tools and no air or special tools in driveway [200][1991]
posted by  pittroj  on Wed May 6 18:32 CST 2009 >
(14 responses)
expand thread  New Cheapo generic radiator has some kind of 1/2 thumbscrew plug top of passenger side, now leaking [200]
posted by  pittroj  on Sun May 10 19:53 CST 2009 >
(5 responses)
expand thread  New 1991 244 AC groans and car surges with AC on, compressor kicks off and on [200]
posted by  pittroj  on Sun May 3 18:39 CST 2009 >
(3 responses)
expand thread  New 1 Drop everything and vacuum leaves/junk out of your rocker panels, preserve your brick [200]
posted by  pittroj  on Sat Apr 25 20:31 CST 2009 >
(6 responses)
expand thread  New 18446744073709551615 Highway kickdown falls on face, the longer it's floored more the RPM'S drop [200][1991]
posted by  pittroj  on Thu Apr 23 16:35 CST 2009 >
(4 responses)
expand thread  New On the fence about buying the IPD sway bar$$$$ [200]
posted by  pittroj  on Wed Apr 15 12:54 CST 2009 >
(23 responses)
expand thread  New 1991 240 has electric fan, and mechanical, but no R134A, and I have never heard fan run [200]
posted by  pittroj  on Tue Apr 14 09:25 CST 2009 >
(7 responses)
expand thread  New Sachs advantage struts rubber strut boots with bump stop built in, do these struts need bump stop? [200]
posted by  pittroj  on Sat Apr 11 07:43 CST 2009 >
(5 responses)
expand thread  New Can I drive 240 to brothers shop, air impact top strut nuts two turns, and drive it home [200]
posted by  pittroj  on Fri Apr 10 13:43 CST 2009 >
(9 responses)
expand thread  New Poly bushings, DIY or have shop press them in? I have the CA arms out of the car, looks easy enough. [200]
posted by  pittroj  on Thu Apr 9 15:12 CST 2009 >
(11 responses)
expand thread  New 2 Rough idle fixed!!! Pre-pump was the culprit [200]
posted by  pittroj  on Sun Mar 29 17:33 CST 2009 >
(9 responses)
expand thread  New Can strut inserts be changed out on the car if you are pulling the control arms? [200][1986]
posted by  pittroj  on Fri Mar 27 04:33 CST 2009 >
(1 response)
expand thread  New Where is ground for 240 prepump [200][1991]
posted by  pittroj  on Tue Mar 24 03:51 CST 2009 >
(5 responses)
expand thread  New Still chasing rough idle, seems to accompany fuel noisy fuel pump when car is warm [200][1991]
posted by  pittroj  on Wed Mar 18 17:29 CST 2009 >
(11 responses)
expand thread  New Ceramic pads versus Genuine Volvo, do ceramics eat rotors quicker than conventional [200]
posted by  pittroj  on Wed Mar 18 20:08 CST 2009 >
(6 responses)
expand thread  New floor vent, and cruise works, but no deffoster vent, I thought if you lose one you lose all [200][1991]
posted by  pittroj  on Mon Mar 16 07:16 CST 2009 >
(3 responses)
expand thread  New Lower CA bushings, poly or OEM rubber for 240, and necessary to replace top bearing when doing struts? [200]
posted by  pittroj  on Mon Mar 16 19:55 CST 2009 >
(5 responses)
expand thread  New Still chasng a rough idle, no check engine light, could 02 sensor still be bad? Bosch 13953 OK? [200][1991]
posted by  pittroj  on Fri Mar 13 20:32 CST 2009 >
(9 responses)
expand thread  New Sachs turbo gas shock the same as Sachs advantage? [200]
posted by  pittroj  on Mon Mar 9 20:04 CST 2009 >
(2 responses)
expand thread  New Scan tech coil springs, any quality issues? And what is a good source for the Sachs advantage shock [200]
posted by  pittroj  on Sat Mar 7 20:19 CST 2009 >
(16 responses)
expand thread  New Universal Bosch 02 sensor, or the OEM Bosch 02 sensor [200]
posted by  pittroj  on Tue Mar 10 19:15 CST 2009 >
(2 responses)
expand thread  New Did I get a good deal? 240 needs some work, turning into more work. 2300.00 [200]
posted by  pittroj  on Mon Mar 2 21:13 CST 2009 >
(16 responses)
expand thread  New Thinking of installing IPD heavy duty rear coils and a stock shock on my 240 sedan, any experience? [200]
posted by  pittroj  on Wed Mar 4 21:29 CST 2009 >
(12 responses)
expand thread  New Steering wheel cocked a little to the right, tie rod ends not installed right? Sway bar bushings, rubber or poly? [200]
posted by  pittroj  on Mon Mar 2 21:21 CST 2009 >
(7 responses)
expand thread  New Keep getting "Bad Request' messages when using the forum search
posted by  pittroj  on Sun Feb 22 16:00 CST 2009 >
(5 responses)
expand thread  New 1993 940 turbo smoked on startup, and has been using oil, at 32000 miles!!! [900]
posted by  pittroj  on Mon Jun 7 08:28 CST 2004 >
(5 responses)
expand thread  New Gas tank puncture on plastic 940 tank, Can it be repaired? [900]
posted by  pittroj  on Tue Dec 16 20:02 CST 2003 >
(2 responses)
expand thread  New Blowing a high nox on the emissions test on a 1987 240, part 2
posted by  pittroj  on Wed Oct 8 15:28 CST 2003 >
(1 response)
expand thread  New 1987 240 failed the emission test, high NO readings.
posted by  pittroj  on Sun Sep 14 07:50 CST 2003 >
(2 responses)
expand thread  New How can I tell if I am a tooth off on the timing WITHOUT taking it all apart again?
posted by  pittroj  on Wed Jul 9 07:03 CST 2003 >
(5 responses)
expand thread  New Will it run at all if the timing marks are one tooth off?
posted by  pittroj  on Mon Jul 7 19:37 CST 2003 >
(2 responses)
expand thread  New My first oil change on a turbo, how do you get all of the oil out of the oil cooler?
posted by  pittroj  on Thu Jul 3 03:36 CST 2003 >
(3 responses)
expand thread  New HELP!!! I accidently got all the timing marks out of line, how do I start from square one?
posted by  pittroj  on Mon Jul 7 10:57 CST 2003 >
(4 responses)
expand thread  New Looking for some opinions on 16 inch tires for my 940 turbo [900][1993]
posted by  pittroj  on Tue Jul 1 18:10 CST 2003 >
(5 responses)
expand thread  New Still under the gun to fix my leak, if I pull the breather box off the block.......... [200][1987]
posted by  pittroj  on Mon Jun 30 17:25 CST 2003 >
(1 response)
expand thread  New I need to do the front engine seals, timing belt and tensioner in 15 hours, do-able?
posted by  pittroj  on Sun Jun 29 17:21 CST 2003 >
(4 responses)
expand thread  New Still desperately seeking 1993 BlACK 240 sedan [1993]
posted by  pittroj  on Fri Feb 21 11:00 CST 2003 >
(7 responses)
expand thread  New Still desperately seeking 1993 black 240 sedan with low miles [200][1993]
posted by  pittroj  on Wed Jan 22 17:38 CST 2003 >
(6 responses)
expand thread  New Wanted to buy, again: Black 1993 240, still in the market for one..... [200][1993]
posted by  pittroj  on Tue Dec 17 16:21 CST 2002 >
(8 responses)
expand thread  New Will an alternator off of a 1983 240 work on my external regulator 1980? [200][1980]
posted by  pittroj  on Tue Dec 10 06:03 CST 2002 >
(4 responses)
expand thread  New Another quickie alternatorr question [200][1980]
posted by  pittroj  on Tue Dec 10 11:16 CST 2002 >
(1 response)
expand thread  New Only 11.50 volts at the battery while running, should be at least 13.50 volts, alternator or voltage regulator? [200][1980]
posted by  pittroj  on Mon Dec 9 16:30 CST 2002 >
(5 responses)
expand thread  New Help!! Stranded on the interstate!!!! Won't start, and it is not the battery. [200][1980]
posted by  pittroj  on Thu Dec 5 11:22 CST 2002 >
(4 responses)
expand thread  New Cabin air intake cover,keeps the rain and leaves out of the cowl vents, and therefore the rockers. [200]
posted by  pittroj  on Thu Nov 28 21:51 CST 2002 >
(3 responses)
expand thread  New Wanted: A Black 1993 240 sedan, with low miles. [200][1993]
posted by  pittroj  on Mon Nov 25 18:49 CST 2002 >
(8 responses)
expand thread  New Anybody seen Kirks1983 242 DL story on the internet? [200][1983]
posted by  pittroj  on Thu Nov 21 18:13 CST 2002 >
(1 response)
expand thread  New Advancing timing for more power--- anybody have any advice? More power = more engine wear? [200][1987]
posted by  pittroj  on Mon Nov 18 15:40 CST 2002 >
(13 responses)
expand thread  New Steering wheel pulls to right after tie rod end replacement, even though I screwed the new ones on the same amount of turns. [200][1987]
posted by  pittroj  on Wed Nov 13 20:18 CST 2002 >
(7 responses)
expand thread  New Fixed my start-stall problem but now my overdrive arrow on the dash won't go out. [200][1987]
posted by  pittroj  on Fri Nov 1 18:09 CST 2002 >
(2 responses)
expand thread  New BULLETIN!!! BULLETIN!!!! Amm cured my start-stall start- stall then run poorly for a couple hundred yards problem!!! [200][1987]
posted by  pittroj  on Fri Nov 1 17:25 CST 2002 >
(2 responses)
expand thread  New How to test the ecu temp. sensor, the location, the symptoms, start-stall-start stall? [200][1987]
posted by  pittroj  on Fri Nov 1 10:10 CST 2002 >
(1 response)
expand thread  New Which thermostat to run in the midwest going into winter...... [200][1987]
posted by  pittroj  on Thu Oct 17 07:35 CST 2002 >
(4 responses)
expand thread  New Did volvo send any manual shift 940's stateside? [900]
posted by  pittroj  on Tue Oct 8 17:01 CST 2002 >
(3 responses)
expand thread  New Drained the block and radiator while still hot, could I have done any damage [200][1987]
posted by  pittroj  on Wed Sep 11 09:28 CST 2002 >
(7 responses)
expand thread  New Anybody ever snap off a block drain? [200][1987]
posted by  pittroj  on Wed Sep 11 07:50 CST 2002 >
(1 response)
expand thread  New Flushing the garbage orange antifreeze out and replacing it with the good stuff.... [200][1987]
posted by  pittroj  on Thu Sep 5 20:14 CST 2002 >
(5 responses)
expand thread  New Best way to clean throttle body,Remove throttle switch a must? [200]
posted by  pittroj  on Sat Aug 31 07:18 CST 2002 >
(1 response)
expand thread  New Big Hooters [200][1987]
posted by  pittroj  on Sun Aug 11 11:36 CST 2002 >
(3 responses)
expand thread  New My brick starts, stalls, starts,stalls, when cold then after warmed up starts up fine, fuel check valve? [200][1987]
posted by  pittroj  on Sat Aug 10 08:15 CST 2002 >
(3 responses)
expand thread  New Glass fuses, yes or no for my 240 [200]
posted by  pittroj  on Tue Jul 30 19:42 CST 2002 >
(2 responses)
Showing 1 through 72 of 72 matching threads within selected month (Recently modified at Top).
1

[ALL] [THUMBS UP] [NO REPLIES] [LATEST] [PASS] [MODIFIED | CREATED] [A] [A]



Users marked in green are currently online.

©Jarrod Stenberg 1997-2007. All material except where indicated.


Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.

All participants agree to these terms.
Powered by Denizen - Custom Software for Enthusiasts