RWD - throttle adjustments
                    

Volvo RWD 200 Forum

INDEX FOR 11/2009(CURRENT) INDEX FOR 8/2005 200 INDEX INDEX (NO RELOAD) [<<]  [>>]

 VIEW    READ ONLY    PRINT   SAVE   A    A 

throttle adjustments 200 1989

Had to replace the computer and TSP on my 1989 2240DL, Jetronic 2.4. Surging then really high idle.
1. Throttle linkage - should it be adjusted to put no pressure on the throttle valve arm or some downward pressure?
2. TPS - How much movement of the throttle valve arm should there be before the "click"?
3. Sometimes when letting off the throttle the car has a fast idle, sometimes normal idle. Tried it with the throttle likage disconnected from the throttle valve arm, same results. Cleaned the throttle valve with spray. Should I remove it and clean/rebuild it? Might be bindking sometimes? Are there rebuild kits?




Select, copy to buffer, and paste anywhere:


[about brickboard ads]

THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD
New throttle adjustments [200][1989]
posted by  JOHNVON  on Tue Aug 9 13:21 CST 2005 >


[about brickboard ads]

<< < > >>


Users marked in green are currently online.

©Jarrod Stenberg 1997-2007. All material except where indicated.


Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.

All participants agree to these terms.
Powered by Denizen - Custom Software for Enthusiasts