• ALL
• 444-544
• 120-130
• 1800
• 140-160
• 200
• 300
• 700
• 900
• S90-V90

Volvo RWD Forum

INDEX FOR 11/2009(CURRENT) INDEX FOR 10/2003 INDEX (NO RELOAD) [<<]  [>>]

VIEW    READ ONLY    PRINT   SAVE   A    A  blown gasket or cracked block? posted by  joshcxcb on  Wed Oct 29 23:27 CST 2003 Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS]     [IGNORE ALL POSTS] [RELATED] i spent 1100 on various repairs only to find the compression is low in the 2 and 3 cylindars, low like 65 in each, they said pressure is going from one piston to the other. They wont open it up and look until I pay my prior bill, sounds shady. they did offer to do the entire top end rebuild and mill the heads for 300 dollars due to my situation. any advice anyone? Mark this post as an answer to my question<- Use this feature to mark quality replies to your post. Select, copy to buffer, and paste anywhere: <a href="http://www.brickboard.com/RWD/volvo/703248/blown_gasket_cracked_block.html ">blown gasket or cracked block?</a>

[about brickboard ads]

THREADED

THREADED EXPANDED

FLAT

PRINT ALL

• blown gasket or cracked block?
  posted by  Rludwick  on Thu Oct 30 00:16 CST 2003 > V
  • blown gasket or cracked block?
    posted by  joshcxcb  on Thu Oct 30 14:31 CST 2003 > V
    • blown gasket or cracked block?
      posted by  Rludwick  on Thu Oct 30 14:57 CST 2003 > V
      • blown gasket or cracked block?
        posted by  joshcxcb  on Fri Oct 31 14:25 CST 2003 > V

©Jarrod Stenberg 1997-2007. All material except where indicated.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.