Volvo RWD 700 Forum
INDEX FOR 11/2009(CURRENT)
INDEX FOR 10/2003
700 INDEX
INDEX (NO RELOAD)
[<<]
[>>]
posted by
VOLJO
on
Wed Oct 29 23:21 CST 2003
Author:
[PROFILE]
[EVERY POST]
[THREADS]
[BEST POSTS]
[IGNORE ALL POSTS]
last visit: Wed May 2 12:15 CST 2007
[RELATED]
|
|
These are excerpts from the FAQ.
"[Pete Fluitman] Check the heater hoses, I have seen several 700's where they are swapped over and it results in ZERO heat. The one connected to the side of the block is the hot water feed. It goes to the TOP BULKHEAD OUTLET VIA THE HEATER VALVE. The hose connected to the metal pipe on the manifold is the return, it sucks the cold water out from the lower outlet."
"Install the new valve and tighten the clamps. [RMagoo] The valve goes between the heater hose connected to the short pipe coming out the cylinder head and the HEATER HOSE ENTERING THE BOTTOM TUBE of the firewall connector . The arrow on the valve points toward the firewall. The top heater hose goes to the red pipe behind the head leading to the water pump."
My question is which is correct? Is the heater valve connected to the top heater core outlet or the bottom heater core outlet?
|
Select, copy to buffer, and paste anywhere:
|
[about brickboard ads]
|
HEATER HOSES [700][1987]
posted by
VOLJO
on Wed Oct 29 23:21 CST 2003 >
V
-
HEATER HOSES [700][1987]
posted by
fabianpierce
on Fri Oct 31 13:22 CST 2003 >
V
-
HEATER HOSES [700][1987]
posted by
Steve
on Thu Oct 30 07:13 CST 2003 >
V
Users marked in green are currently online.
©Jarrod Stenberg 1997-2007. All material except where indicated.
Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.