RWD - Auto to manual swap what do I need?
                    

Volvo RWD 700 Forum

INDEX FOR 11/2009(CURRENT) INDEX FOR 7/2009 700 INDEX INDEX (NO RELOAD) [<<]  [>>]

THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD



  READ ONLY    PRINT   SAVE 

Auto to manual swap what do I need? 700

Hi,
I'm planning on doing an auto to manual swap on my '86 740ti wagon, I already sourced out a good m46 from another 740ti and I know I need to find a set of pedals, a clutch master cylinder, and a flywheel and clutch, but am I forgetting anything? Will the driveshaft from the auto fit the manual or does that need to be changed also?
Thanks




Select, copy to buffer, and paste anywhere:


[about brickboard ads]



  READ ONLY    PRINT   SAVE 

Auto to manual swap what do I need? 700

cant use the same driveshaft as auto diffent length plus the flange gearbox end is different...i had to make one up cause i couldnt find one..manual 7 series Volvo's are rare as here..Daryl




Select, copy to buffer, and paste anywhere:




  READ ONLY    PRINT   SAVE 

Auto to manual swap what do I need? 700

http://www.brickboard.com/FAQ/700-900/VolvoAW70M46Conversion/AW71M46Conversion.htm
--
Post Back. That's whats makes this forum work.




Select, copy to buffer, and paste anywhere:



[about brickboard ads]

<< < > >>


Users marked in green are currently online.

©Jarrod Stenberg 1997-2007. All material except where indicated.


Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.

All participants agree to these terms.
Powered by Denizen - Custom Software for Enthusiasts