Volvo RWD 700 Forum
INDEX FOR 11/2009(CURRENT) INDEX FOR 6/2009 700 INDEX INDEX (NO RELOAD) [<<] [>>]| THREADED |
|
THREADED EXPANDED |
|
FLAT |
|
PRINT ALL |
| MESSAGES IN THIS THREAD |
Mark this post as an answer to my question<- Use this feature to mark quality replies to your post.
Select, copy to buffer, and paste anywhere:
|
[about brickboard ads] |
-
READ ONLY
PRINT
SAVE AC pressure with retrofit R134a? 700 1990
posted by aleekat on Tue Jun 30 19:29 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS]
[IGNORE ALL POSTS]
last visit: Sat Nov 21 07:52 CST 2009[RELATED]Unlike R12, you can overfill 134. You can try the DIY from wallyworld, but not knowing how much is in there, you are taking a gamble. Here's the conversion info, discusses filling procedures.
http://www.brickboard.com/FAQ/700-900/VolvoR134Conversion/R134ConversionPage1.htm
--
Post Back. That's whats makes this forum work.
Mark this post as an answer to my question<- Use this feature to mark quality replies to your post.
Select, copy to buffer, and paste anywhere:
-
READ ONLY
PRINT
SAVE AC pressure with retrofit R134a? 700 1990
posted by DPNY on Wed Jul 1 06:34 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS]
[IGNORE ALL POSTS]
last visit: Sun Oct 4 12:55 CST 2009[RELATED]Thanks. It seems I need to take it to an AC shop and have it tested.
Mark this post as an answer to my question<- Use this feature to mark quality replies to your post.
Select, copy to buffer, and paste anywhere:
-
READ ONLY
PRINT
SAVE AC pressure with retrofit R134a? 700 1990
posted by DPNY on Wed Jul 1 16:25 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS]
[IGNORE ALL POSTS]
last visit: Sun Oct 4 12:55 CST 2009[RELATED]I have no leaks and it is fully charged but it is not real cold. Only 68 degrees when measuring the inside vent.
Mechanic suggests I need accumulator. The receiver/dryer.
Installed in my 740 I have a factory retrofit from R12 to R134a.
Can anybody suggest an exact replacement accumulator receiver/dryer? An actual part number or supplier link would be most helpful. USA.
I have taken a photo and can say that from the front of the car one valve goes straight back into the interior of the car and another goes directly forward to the condenser. These two main valves are opposite each other on the accumulator.
Then on the left is a valve that has a cap and no connection. And to the right is an electric sensor connector.
The filler valve is on the pipe from the valve that leads directly back to the interior.
Thanks,
Dean
Mark this post as an answer to my question<- Use this feature to mark quality replies to your post.
Select, copy to buffer, and paste anywhere:
-
-
©Jarrod Stenberg 1997-2007. All material except where indicated.
Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.