• ALL
• 444-544
• 120-130
• 1800
• 140-160
• 200
• 300
• 700
• 900
• S90-V90

Volvo RWD S90-V90 Forum

INDEX FOR 11/2009(CURRENT) INDEX FOR 6/2009 S90-V90 INDEX INDEX (NO RELOAD) [<<]  [>>]

THREADED

THREADED EXPANDED

FLAT

PRINT ALL

READ ONLY    PRINT   SAVE  Transmission Flush - S90 - Questions S90-V90 1997 posted by  DougC on  Fri Jun 26 22:48 CST 2009 Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS]     [IGNORE ALL POSTS] last visit: Wed Nov 11 20:06 CST 2009 [RELATED] I want to flush the transmission fluid in my wife's 1997 960. It looks like when I disconnect the top transmission line to the passenger side of the radiator, I will be left with a female fitting. I can't attach a hose to that. Does anyone know what kind of nipple (what thread type) I should be searching for to screw into the female fitting on the radiator that will leave me with a male end to put a hose on? I'd like to have the right fitting on hand before I open the line. It looks like it needs to be a fitting with two male ends, but I don't know what type of threads it should have. Other than that, I'm planning on doing the flushing the same way I've done it on automatic 240's: pump two quarts out, pour two quarts in, pump two more out, two more in, etc., until it comes out clean and red. Any information or advice would be appreciated. -- Thanks for all the help. DougC 1981 242, IPD bars and Turbo wheels, M46 :::::::::::::::::: 1993 245, B230 NA L-Block, M47, Turbo bars::::::::::::1984 760, B23FT, M46, waiting to donate engine to 242 Mark this post as an answer to my question<- Use this feature to mark quality replies to your post. Select, copy to buffer, and paste anywhere: <a href="http://www.brickboard.com/RWD/volvo/1356875/S90-V90/transmission_flush_s90_questions.html">Transmission Flush - S90 - Questions</a>

[about brickboard ads]

• 
  
  
  

  READ ONLY    PRINT   SAVE  Transmission Flush - S90 - Questions S90-V90 1997 posted by  dewfpo on  Sat Jun 27 17:32 CST 2009 Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS]     [IGNORE ALL POSTS] last visit: Sat Nov 21 19:09 CST 2009 [RELATED] You don't need a fitting on the female end. Just measure the outside diameter of the nut (largest corners) and get a clean tube about 4-6' long with and ID the same or slightly smaller than the diameter you measured. Just push it on snug, it won't blow off and won't make a mess. DEWFPO -- 1998 S90 083,228 and 1995 964 154,100 Mark this post as an answer to my question<- Use this feature to mark quality replies to your post. Select, copy to buffer, and paste anywhere: <a href="http://www.brickboard.com/RWD/volvo/1356964/S90-V90/transmission_flush_s90_questions.html">Transmission Flush - S90 - Questions</a>

  • 
    
    
    

    READ ONLY    PRINT   SAVE  Transmission Flush - S90 - Questions S90-V90 1997 posted by  chilliwack on  Sun Jun 28 22:06 CST 2009 Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS]     [IGNORE ALL POSTS] last visit: Sat Nov 21 09:06 CST 2009 [RELATED] Make sure to use hose clamps ,it will blow off and make a mess. Mark this post as an answer to my question<- Use this feature to mark quality replies to your post. Select, copy to buffer, and paste anywhere: <a href="http://www.brickboard.com/RWD/volvo/1357133/S90-V90/transmission_flush_s90_questions.html">Transmission Flush - S90 - Questions</a>

    • 
      
      
      

      READ ONLY    PRINT   SAVE  Transmission Flush - S90 - Questions S90-V90 1997 posted by  hans747 on  Fri Jul 3 09:04 CST 2009 Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS]     [IGNORE ALL POSTS] last visit: Fri Oct 30 14:15 CST 2009 [RELATED] If I were doing this job, it wouldn't blow off. But I would still manage to make a mess. Mark this post as an answer to my question<- Use this feature to mark quality replies to your post. Select, copy to buffer, and paste anywhere: <a href="http://www.brickboard.com/RWD/volvo/1357958/S90-V90/transmission_flush_s90_questions.html">Transmission Flush - S90 - Questions</a>

©Jarrod Stenberg 1997-2007. All material except where indicated.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.